GSM Outdoors
GSM Outdoors 2 in 1 accessory Hirose 8 pin female HR25-7TP-8S 3M
High-flex Hirose 8-pin female cable with flying leads for industrial camera power and data, 3 m length
- High-flex design withstands repeated movement in industrial setups
- Hirose 8-pin female HR25-7TP-8S connector mates with Allied Vision Guppy and Mako cameras
- Flying-lead termination allows custom wiring for power, I/O trigger and data
- 3 metre length suits typical machine-vision installations
- Every cable tested for short circuits before shipment
Hirose 8-Pin Industrial Camera Cable
This high-flex cable connects Allied Vision Guppy, Mako, Daheng and other industrial cameras to power, I/O trigger and data lines. It is built for machine-vision rigs, factory automation and inspection systems that need a reliable link between camera and controller. The 3 metre length suits typical bench or production-line runs. Buyers needing a different connector standard or a non-industrial camera interface should look elsewhere.
Plug-and-Play Flying-Lead Install
Plug A is a keyed Hirose HR25-7TP-8S female that mates securely with the camera port; Plug B is a flying-lead tail you terminate to your own terminal block or breakout board. Each unit is continuity-tested before shipment to eliminate shorts. The main installation risk is mis-wiring the bare leads — verify the pin-out against your camera manual before soldering or crimping.
Check Camera Port and Lead Prep
Confirm your camera uses the exact Hirose 8-pin female HR25-7TP-8S interface; other Hirose variants will not mate. Ensure you have the tooling and skill to terminate eight flying leads to your chosen connector or screw terminals. The cable jacket is high-flex rated, so verify the bend radius suits your cable-carrier or robot-arm path.
Highlights
- High-flex design withstands repeated movement in industrial setups
- Hirose 8-pin female HR25-7TP-8S connector mates with Allied Vision Guppy and Mako cameras
- Flying-lead termination allows custom wiring for power, I/O trigger and data
- 3 metre length suits typical machine-vision installations
- Every cable tested for short circuits before shipment
Specifications
No published specifications for this item yet.
Questions about this item
How can I verify the Hirose 8-pin HR25-7TP-8S cable is functioning correctly after connecting it to my industrial camera?
Power the camera and confirm stable I/O trigger signals and error-free GigE data transmission; each cable is pre-tested for short circuits before shipment.
What does the package include and what must be sourced separately for the 3 m Hirose 8-pin female to flying lead cable?
The box contains one 3 m Hirose 8-pin female to flying lead cable; you must supply the matching power supply and any terminal connectors for the open leads.
Which cable length option should I select for the Hirose 8-pin HR25-7TP-8S to flying lead cable?
Choose 1 m, 2 m, 3 m or 5 m based on the distance between your Allied Vision, Daheng or similar industrial camera and the power or I/O controller.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
