GSM Outdoors
GSM Outdoors 2 in 1 accessory 1312ft 400m 5.0mm armoured fibre cable
Armoured single-mode fibre cable with pulling eye, 400 m length and 5.0 mm diameter for harsh outdoor installation
- Industrial TPU jacket resists water, UV and extreme temperatures
- Dual metal-steel armor and glass-fibre yarns block rodent damage
- Pre-terminated pulling eye on one end prevents cable damage during install
- 0 mm diameter withstands heavier wear than 3.0 mm cables
- 400 m / 1312 ft single-mode duplex LC uniboot ready for long runs
Industrial armoured fibre cable
This 1312ft 5.0mm outdoor cable uses an OS2 single-mode duplex construction with LC uniboot connectors. A factory-fitted swivel pulling eye on one end protects the fibre during long pulls through ducts or risers. The TPU jacket resists water, UV, abrasion and extreme temperatures for direct burial, aerial or conduit installation. Steel armour and glass-fibre yarns add dual rodent protection for harsh sites.
Installers needing pre-terminated long-haul links
Suits contractors running campus, roadside or industrial backbone links where a 400m drum eliminates mid-span splices. The pulling eye speeds deployment in tight conduit and can be reused on future jobs. Not for buyers who need a shorter patch lead, multimode fibre or a different connector polish.
Pulling eye kit and armour
The swivel pulling eye prevents tensile damage while the cable is drawn, then removes cleanly for reuse. Combined steel tape and glass yarns stop rodents chewing through the jacket. Uniboot LC connectors halve the panel footprint compared with standard duplex clips. The 5.0mm diameter withstands more crush and impact than a 3.0mm alternative.
Highlights
- Industrial TPU jacket resists water, UV and extreme temperatures
- Dual metal-steel armor and glass-fibre yarns block rodent damage
- Pre-terminated pulling eye on one end prevents cable damage during install
- 0 mm diameter withstands heavier wear than 3.0 mm cables
- 400 m / 1312 ft single-mode duplex LC uniboot ready for long runs
Specifications
No published specifications for this item yet.
Questions about this item
What network equipment must I already have to connect this LC uniboot cable?
You need two single-mode ports with duplex LC interfaces — such as SFP transceivers, patch panels or media converters — one for each fibre in the duplex link.
Can I run this 5.0 mm armoured cable alongside older 3.0 mm patch cords in the same tray?
Yes, the 5.0 mm outer diameter and steel-armour construction are compatible with standard cable management; the larger diameter simply occupies more space and adds rodent protection.
How do I verify the OS2 link is working after I pull the cable and remove the pulling eye?
Connect a visual fault locator or launch light into one LC uniboot end; visible red light at the far end confirms continuity through both fibres.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
