GSM Outdoors
GSM Outdoors 2 in 1 accessory 1000BASE-T SFP RJ45 Copper Transceiver Module Fortinet compatible 100m Cat5e/6
A 1000BASE-T SFP RJ45 copper transceiver module compatible with Fortinet gear, reaching 100m over Cat5e/6 with 1.2W max power draw
- Supports 100m copper links via RJ-45 connector
- Low 1.2W power draw cuts energy use
- Operates reliably from 0 to 70°C
- Hot-pluggable SFP MSA design eases maintenance
- IEEE 802.3 compliant for Gigabit Ethernet networks
Copper SFP RJ45 Transceiver
This 1000BASE-T SFP module provides a copper RJ45 interface for Gigabit Ethernet links up to 100m over Cat5e or Cat6 cabling. It is coded for compatibility with Fortinet FS-TRAN-GC, FG-TRAN-GC and FR-TRAN-GC transceivers. The unit draws a maximum of 1.2W and operates from 0 to 70C.
Check SFP Port and SERDES Support
Verify that your switch or router has an open SFP cage that accepts 1000BASE-T copper modules and presents a SERDES interface to the transceiver. Confirm the host equipment supports the IEEE 802.3ab standard and that the port can supply the required power budget. Ensure the intended cable run does not exceed the 100m reach specified for this module.
Suits Fortinet Network Upgrades
Network administrators extending Fortinet switches with copper uplinks will find this module a direct fit. It is not suited for fibre-only deployments, for links longer than 100m, or for hosts lacking an SFP cage with SERDES signalling. Buyers needing multi-gigabit speeds or different vendor coding should look at alternative transceiver types.
Highlights
- Supports 100m copper links via RJ-45 connector
- Low 1.2W power draw cuts energy use
- Operates reliably from 0 to 70°C
- Hot-pluggable SFP MSA design eases maintenance
- IEEE 802.3 compliant for Gigabit Ethernet networks
Specifications
No published specifications for this item yet.
Questions about this item
What comes in the box with the SFP RJ45 transceiver module and is anything else required?
The module itself is supplied. A Cat5e or Cat6 patch cable up to 100 m and a host device with an SFP cage and SERDES interface must be provided separately.
How do I choose between the listed Fortinet part numbers FS-TRAN-GC FG-TRAN-GC FR-TRAN-GC?
All three part numbers refer to the same 1000BASE-T copper transceiver; pick the one that matches your Fortinet switch model documentation.
What does the 1000BASE-T rating mean once the module is installed in a switch?
It delivers 1 Gb/s Ethernet over copper up to 100 m, draws a maximum of 1.2 W, and operates from 0 to 70 °C (32 to 158 °F) inside the host system.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
