GSM Outdoors
GSM Outdoors 2 in 1 accessory 10-Port PCIe SATA Card Full-Height Bracket
Adds ten SATA 3.0 ports via PCIe x1 using JMicron JMB582 and JMB575 chips with ten cables included
- Add ten drives at 6 Gbps each via a single PCIe x1 slot
- JMicron JMB582 and JMB575 controllers for broad compatibility
- Works with Windows 11, 10, 8, Server, Linux, FreeBSD, VMware ESXi
- Ten SATA cables included so you can start installing immediately
- Full-height bracket pre-installed for standard tower chassis
Ten-port SATA expansion
This PCIe add-in card adds ten SATA 3.0 ports to a desktop computer, letting builders connect up to ten hard drives or solid-state drives at once. It targets system integrators and enthusiasts who need dense internal storage without a RAID controller. The board uses a JMicron JMB582 plus JMB575 chipset and supports port-multiplier command-based switching for broad drive compatibility.
PCIe 3.0 x1 host interface
The card plugs into any PCIe x1, x2, x4, x8 or x16 slot and runs at PCIe 3.0 x1 speeds, delivering 8 Gbps of total host bandwidth. Each SATA port can reach 6 Gbps, but the shared upstream link means sustained throughput across all ten drives is limited by that single-lane connection. Buyers who need full 6 Gbps on every port simultaneously should look for a multi-lane host card.
Ten drives with included cables
Ten SATA data cables ship in the box, so the card can populate all ports immediately. The pre-installed full-height bracket fits standard tower cases; no low-profile bracket is supplied. The controller operates in non-RAID AHCI mode only, so users wanting hardware RAID or a low-profile form factor will need a different solution.
Highlights
- Add ten drives at 6 Gbps each via a single PCIe x1 slot
- JMicron JMB582 and JMB575 controllers for broad compatibility
- Works with Windows 11, 10, 8, Server, Linux, FreeBSD, VMware ESXi
- Ten SATA cables included so you can start installing immediately
- Full-height bracket pre-installed for standard tower chassis
Specifications
No published specifications for this item yet.
Questions about this item
What does the 8 Gbps PCIe 3.0 x1 link mean for the ten SATA ports in my system?
The card splits the 8 Gbps PCIe 3.0 x1 bandwidth across all ten ports, so simultaneous heavy traffic on multiple drives will share that ceiling while each port can still reach 6 Gbps individually.
Which PCIe slot versions and sizes does the x1 interface work with?
The x1 connector is compatible with PCIe 1.0, 2.0 and 3.0 slots and will fit physically into x1, x2, x4, x8 or x16 motherboard sockets.
Will the pre-installed full-height bracket fit my standard tower case?
Yes, the full-height bracket is designed for standard ATX tower chassis; a low-profile bracket is not included.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
