We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear silicone lubricant in a 10 oz container

Gruvlok

Gruvlok Silicone Lubricant 10 Oz -65 to 400 F

SKU CH-0E01-3NTRS

Silicone lubricant in a 10 oz container operates from -65 to 400 F for Gruvlok couplings and meets FDA regulations 21.172.878, 21.177.1550 and 21.178.3570

  • Clear silicone formula eases coupling assembly
  • Withstands -65 °F to 400 °F for extreme environments
  • FDA CFR 21.172.878 compliant for incidental food contact
  • 10 oz aerosol covers multiple Gruvlok installations

Gruvlok Silicone Lubricant 10 oz for Couplings

This silicone-based lubricant comes in a 10 oz container and is formulated for Gruvlok couplings. It meets FDA regulations 21.172.878, 21.177.1550 and 21.178.3570 for incidental food contact. Maintenance teams use it to ease gasket installation and protect sealing surfaces during assembly. The clear fluid simplifies visual inspection of coated parts.

Operating Range -65 to 400 F

The lubricant remains effective across a temperature span of -65 to 400 F, resisting freeze-up in cold environments and thermal breakdown in high-heat systems. Its silicone base maintains consistent viscosity to reduce friction without hardening or dripping under normal service loads. The stable film lowers the torque needed for coupling make-up and helps prevent galling on metal threads. Power consumption and noise are not applicable to this fluid product.

Highlights

  • Clear silicone formula eases coupling assembly
  • Withstands -65 °F to 400 °F for extreme environments
  • FDA CFR 21.172.878 compliant for incidental food contact
  • 10 oz aerosol covers multiple Gruvlok installations

Specifications

BrandGRUVLOK

Questions about this item

How do I apply the 10 oz silicone lubricant to Gruvlok coupling gaskets without contaminating the joint?

Wipe the gasket and coupling surfaces clean, then brush a thin, even coat of the clear silicone lubricant onto the gasket only; avoid excess inside the pipe bore where it could affect fluid purity.

When should I reapply lubricant on a coupling that cycles between -65 and 400 °F?

Inspect the gasket at each scheduled maintenance; if the silicone film appears dry, cracked or washed out, clean the surfaces and reapply a fresh coat before reassembly.

More in Lubricants, Coolants & Fluids

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.