We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grote 67005 three-wire female pin pigtail 10 1/2 inch 18 AWG 90-degree plug

Grote

Grote 67005 Female Pin Pigtail 3 Wire 10 1/2 in 18 AWG

SKU CH-3M0X-MKHPR

Three-wire pigtail with 18 AWG leads, 10 1/2 in length and 90-degree moisture-resistant connectors for stop, turn and tail lights

  • TypeElectrical Boxes & Covers
  • Ready for stop, turn, tail lights with 3-wire 18 AWG pigtail
  • 90-degree plug eases tight-space routing behind lamps
  • Grease grooves and moisture resistance protect connections from corrosion
  • 10 1/2 in wire length and 11 in overall reach fit standard housings
  • GPT wire material handles automotive voltage and temperature demands

Grote 67005 Female Pin Pigtail 3 Wire

The Grote 67005 is a 3-wire female pin pigtail designed for automotive lighting repairs. It connects stop, turn and tail light assemblies using an 18 AWG GPT wire construction. The assembly includes two connectors and measures 10 1/2 inches of wire with an 11 inch overall length. It suits technicians replacing damaged factory harnesses on compatible lamp housings.

90 Degree Plug with Grease Grooves

The moulded 90 degree plug routes wires cleanly in tight lamp cavities while grease grooves help seal out moisture and corrosion. Wire length is fixed at 10 1/2 inches, so installers must verify reach before cutting the harness. The blunt cut and ring terminal ends require crimping or soldering to the vehicle loom. No other connector styles or lengths are provided with this part.

Replaces Damaged Factory Light Harnesses

This pigtail replaces a corroded or severed original connector on stop, turn and tail lights without rewiring the full circuit. The jump is worth it when the lamp housing is intact but the plug pins have failed from water ingress. It does not address faults upstream in the vehicle wiring or add circuits not present in the original design.

Highlights

  • Ready for stop, turn, tail lights with 3-wire 18 AWG pigtail
  • 90-degree plug eases tight-space routing behind lamps
  • Grease grooves and moisture resistance protect connections from corrosion
  • 10 1/2 in wire length and 11 in overall reach fit standard housings
  • GPT wire material handles automotive voltage and temperature demands

Specifications

BrandGROTE
TypeElectrical Boxes & Covers

Questions about this item

Should I pick the 18 AWG version or a heavier gauge for my stop-turn-tail lights?

The 18 AWG pigtail is the gauge supplied for Grote stop, turn and tail light connections; choose it when the lamp wiring specifies 18 AWG.

What does the 10 1/2 in wire length mean once the pigtail is installed in the housing?

It provides roughly 10 1/2 inches of GPT wire from the blunt-cut end to the 90-degree male pin connector, giving enough slack for routing inside the light assembly.

Will the male pin connector fit the standard SAE stop-turn-tail socket on my trailer?

The 90-degree male pin connector is designed for Grote-compatible stop, turn and tail light sockets; verify the socket pin layout matches before installing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.