We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear rectangular electromechanical flasher relay with molded base and plug-in terminals

Grote

Grote 44820 Electromechanical Flasher Clear car electronics accessory

SKU CH-WJH9-DVTY9

Electromechanical flasher relay rated 12 V DC, 25 A, with a steady 60–120 flashes per minute and plug-in mounting

  • TypeFuses & Accessories
  • 12 V DC system voltage ensures reliable flasher operation
  • 25 A current rating supports standard lighting circuits
  • 60 to 120 flashes per minute meets signalling requirements
  • FMVSS 108 and SAE J1690, J590b, J945 compliance confirms road-legal use
  • Plug-in mount with molded base and terminals simplifies installation

Grote 44820 Electromechanical Flasher

The Grote 44820 is a 12V DC electromechanical flasher relay designed for automotive lighting circuits. It provides a steady flash rate between 60 and 120 flashes per minute. This plug-in unit suits vehicles requiring a standard single-connector flasher for turn signals or hazard lights.

Thermals Noise Power

The relay carries a current rating of 25 A with a moulded base and terminals for secure installation. As an electromechanical device, it produces an audible click during operation. Power draw is determined by the connected lighting load within the 25 A limit at 12V.

Deciding Specification

The unit meets FMVSS 108 and SAE standards J590b, J945, and J1690 for vehicle lighting compliance. It is restricted from sale in certain states. Buyers needing a different flash rate range, multiple connectors, or a solid-state design should verify compatibility before purchase.

Highlights

  • 12 V DC system voltage ensures reliable flasher operation
  • 25 A current rating supports standard lighting circuits
  • 60 to 120 flashes per minute meets signalling requirements
  • FMVSS 108 and SAE J1690, J590b, J945 compliance confirms road-legal use
  • Plug-in mount with molded base and terminals simplifies installation

Specifications

BrandGROTE
TypeFuses & Accessories

Questions about this item

How do I install the Grote 44820 flasher relay and what is the common mistake?

Plug the unit directly into the socket; the frequent error is forcing the single connector without aligning the moulded base terminals, which can bend pins or crack the housing.

What maintenance or replacement will the Grote 44820 need over time?

The electromechanical mechanism wears with use; replace the relay when the flash rate drifts outside the 60 to 120 flashes per minute range or becomes erratic.

What limit appears first when the Grote 44820 runs continuously under load?

The 25 A current rating is the primary limit; sustained loads at or above this level will overheat the contacts and cause the flash rate to become unstable.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.