Grey Pneumatic
Grey Pneumatic 2020XD 1/2" Drive 5/8" SAE Socket 6 Point tool storage
An extra-deep SAE socket with 1/2 inch drive and 6-point grip for fastener work
- Extra-deep socket reaches recessed fasteners
- 1/2 inch drive fits standard ratchets
- 5/8 inch SAE size matches common hardware
- Six-point design grips flats to prevent rounding
- Grey Pneumatic brand built for professional use
Grey Pneumatic 2020XD Socket
The Grey Pneumatic 2020XD is a 1/2 inch drive SAE socket sized at 5/8 inch with a 6-point configuration. It is built for professional mechanics and serious DIY enthusiasts who need reliable fastener engagement on stubborn bolts. The extra-deep design reaches recessed hardware that standard sockets cannot access. This tool suits heavy-duty automotive and industrial maintenance tasks.
Installation and fitment
The socket slides onto any 1/2 inch drive ratchet or breaker bar without adapters. The 6-point geometry grips the flat sides of the fastener, reducing the chance of rounding off corners. Problems usually arise when users apply excessive torque on seized fasteners or mismatch the drive size, which can damage both the tool and the workpiece. Proper alignment before applying force prevents slippage.
Capacity and headroom
The 5/8 inch SAE opening handles common heavy-duty fasteners found on suspension, drivetrain and engine components. The extra-deep body clears long studs and threaded rods that would bottom out in a shallow socket. It runs out of usefulness on metric hardware, oversized bolts or in extremely tight clearances where a thin-wall or impact-rated design is required.
Highlights
- Extra-deep socket reaches recessed fasteners
- 1/2 inch drive fits standard ratchets
- 5/8 inch SAE size matches common hardware
- Six-point design grips flats to prevent rounding
- Grey Pneumatic brand built for professional use
Specifications
| Brand | GREY PNEUMATIC |
|---|
Questions about this item
How can I confirm the 1/2" drive 5/8" SAE 6-point socket fits correctly after setup?
Fit the socket onto the matching 5/8" SAE fastener and turn with a 1/2" drive ratchet; full engagement and smooth rotation show it is working as intended.
What comes in the box with this Grey Pneumatic 2020XD socket and what must I buy separately?
The package contains the single extra-deep 1/2" drive 5/8" SAE 6-point socket; a compatible 1/2" drive ratchet or breaker bar is sold separately.
Which version of this socket should I choose for a 5/8" SAE fastener?
Select the 2020XD model with 1/2" drive, 5/8" SAE size and 6-point configuration; it is the only version listed for that fastener.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
