Greenlee
Greenlee DTAP10-32 drill tap bit 10-32NF
Drills, taps, deburrs and countersinks 10-32 threads in one step with a power drill
- TypeDies & Taps
- Color/FinishMetal
- Drills, taps, deburrs and countersinks in one pass
- #10-32 UNC thread size for standard machine screws
- High-speed steel construction resists wear in metal
- 2 1/4 inch overall length fits common drill chucks
Drill-tap bit for #10-32 threads
The Greenlee DTAP10-32 combines drilling, tapping, deburring and countersinking in a single pass with a power drill. It produces #10-32 UNC threads in metal and reduces the number of tool changes required on the job. High-speed steel construction withstands repeated use in professional maintenance and assembly work.
Thermals, noise and power draw in normal use
Heat generated during cutting is dissipated through the high-speed steel body and the workpiece itself. Operation is quiet apart from the drill motor and the sound of chip formation. Power demand is determined entirely by the drill used and the material being threaded.
Highlights
- Drills, taps, deburrs and countersinks in one pass
- #10-32 UNC thread size for standard machine screws
- High-speed steel construction resists wear in metal
- 2 1/4 inch overall length fits common drill chucks
Specifications
| Brand | Greenlee Textron |
|---|---|
| Type | Dies & Taps |
| Color/Finish | Metal |
Questions about this item
How do I install the Greenlee DTAP10-32 bit in my power drill for 10-32NF threads?
Chuck the 10-32NF combination bit directly into the drill. The step people miss is applying steady axial pressure so the drill portion starts the hole cleanly before the tap section engages the threads.
What replacement will the Greenlee DTAP10-32 need after repeated 10-32NF use?
The high-speed steel cutting edges will dull over time. When the bit no longer drills cleanly or taps threads smoothly on 10-32NF holes, replace the entire combination bit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
