Greenlee
Greenlee 925 Hole Cutter 2-1/2 in 14 teeth hand tool
Cuts clean holes in wood, plastic and machinable metals with a 14-tooth high-speed steel design and built-in arbor
- TypeHand Saws
- Cuts wood, plastic and machinable metal with 14 high-speed steel teeth
- 1/4 in maximum cutting depth suits shallow-hole tasks
- Built-in arbor removes the need for a separate holder
- 3/8 in hex shank fits standard drill chucks securely
- Replacement arbor 925-022 and pilot drill 925-002 available for maintenance
Greenlee 925 Hole Cutter 2-1/2 in
The Greenlee 925 is a hole cutter with a 2-1/2 inch diameter and 14 high-speed steel teeth. It features a built-in arbor with a 1/2 inch shank and a 3/8 inch thread size. This hand tool is designed for cutting wood, plastic and machinable metal.
Compatibility checklist
Verify that your drill chuck accepts a 1/2 inch shank before ordering. Ensure the 3/8 inch thread size matches any required arbor connections. Confirm the 1/4 inch maximum cutting depth suits the material thickness you intend to cut. The cutter is restricted from sale in certain states.
Thermals noise and power
As a manual hand tool, the Greenlee 925 produces no motor noise and draws no electrical power during operation. Heat generation is limited to friction at the cutting interface. Normal use creates minimal thermal load on the workpiece and the tool body.
Highlights
- Cuts wood, plastic and machinable metal with 14 high-speed steel teeth
- 1/4 in maximum cutting depth suits shallow-hole tasks
- Built-in arbor removes the need for a separate holder
- 3/8 in hex shank fits standard drill chucks securely
- Replacement arbor 925-022 and pilot drill 925-002 available for maintenance
Specifications
| Brand | Greenlee |
|---|---|
| Type | Hand Saws |
Questions about this item
What comes in the box with the Greenlee 925 hole cutter and what must I buy separately?
The cutter ships with its built-in arbor and 14 high-speed steel teeth; replacement arbor 925-022 and pilot drill 925-002 are sold separately.
Which version of the Greenlee 925 should I choose for a 2-1/2 in hole in wood or metal?
This single model cuts a 2-1/2 in diameter hole to 1/4 in depth in wood, plastic or machinable metal using its 14-tooth HSS design.
What does the 14-tooth high-speed steel specification mean when I use the cutter in a drill?
Fourteen HSS teeth give a cleaner cut in wood, plastic and machinable metal at the 1/4 in max depth with a 3/8 in hex shank.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
