Greenlee
Greenlee 925 hole cutter 1-1/8 in HSS 3/8 in hex shank 14 teeth
Cuts 1-1/8 inch holes in wood, plastic and machinable metal using 14 high-speed steel teeth on a 3/8 inch hex shank
- TypeHand Saws
- Cuts wood, plastic and machinable metal with high-speed steel teeth
- 14 teeth give clean holes up to 1/4 in deep
- 3/8 in hex shank locks securely in standard drill chucks
- Replaceable pilot drill and arbor extend tool life
- Greenlee professional grade for reliable performance
Purpose & user
The Greenlee 925 hole cutter produces a 1-1/8 in diameter hole in wood, plastic and machinable metal. Its high-speed steel teeth suit trade professionals and maintenance crews who need repeatable cuts without changing tooling.
What the bundle changes
The cutter ships without an arbor; the compatible replacement arbor is manufacturer number 925-011 and the replacement pilot drill is number 925-001. Buyers must source those items separately to mount the cutter in a drill chuck.
Check before ordering
Verify that your drill accepts a 3/8 in hex shank and can deliver the torque needed for 14 high-speed steel teeth. Confirm the 1/4 in maximum cutting depth meets the material thickness you plan to cut.
Highlights
- Cuts wood, plastic and machinable metal with high-speed steel teeth
- 14 teeth give clean holes up to 1/4 in deep
- 3/8 in hex shank locks securely in standard drill chucks
- Replaceable pilot drill and arbor extend tool life
- Greenlee professional grade for reliable performance
Specifications
| Brand | Greenlee |
|---|---|
| Type | Hand Saws |
Questions about this item
How often will the 14 high-speed steel teeth need sharpening or replacement when cutting wood and machinable metal?
The 14 high-speed steel teeth stay sharp longer than carbon steel; replace them when cutting becomes slow or edges chip.
What limits continuous use before the 1/4 in maximum cutting depth stops the job?
The 1/4 in max cutting depth is the hard stop; you must clear chips frequently or the cut will bind.
Does the 3/8 in hex shank run hot or vibrate after hours of drilling?
The 3/8 in hex shank transfers torque directly; heat stays low if feed pressure is steady and chips clear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
