Greenlee
Greenlee 925-2 Hole Cutter 2 In HSS 3/8 In Hex
Two-inch high-speed steel hole cutter with 14 teeth and a 3/8-inch hex shank for wood, plastic and machinable metal
- TypeHand Saws
- 2 in diameter cuts large holes in wood, plastic and machinable metal
- High-speed steel teeth stay sharp through repeated use
- 14 teeth give a clean finish with less tear-out
- Built-in 3/8 in hex arbor locks securely into the drill chuck
- 1/4 in cutting depth handles thick stock in a single pass
2 Inch Hole Cutter for Wood and Metal
The Greenlee 925-2 is a high-speed steel hole cutter with a two inch cutting diameter. It features a built-in arbor and a 3/8 inch hex shank designed for use with standard drill chucks. The tool suits electricians and maintenance technicians cutting wood, plastic, or machinable metal.
14 Teeth and Quarter Inch Depth Capacity
Fourteen teeth provide a balance of cutting speed and finish quality across the stated materials. The maximum cutting depth reaches one quarter of an inch, limiting the tool to thin sheet stock, panels, or shallow recesses. Thicker workpieces require a different cutter or multiple passes from both sides.
High Speed Steel Construction for Heat Resistance
High speed steel teeth retain hardness at elevated temperatures generated during metal cutting. The built-in arbor eliminates a separate component, reducing setup time and potential runout. A replaceable pilot drill and arbor are available separately to extend the service life of the cutter body.
Highlights
- 2 in diameter cuts large holes in wood, plastic and machinable metal
- High-speed steel teeth stay sharp through repeated use
- 14 teeth give a clean finish with less tear-out
- Built-in 3/8 in hex arbor locks securely into the drill chuck
- 1/4 in cutting depth handles thick stock in a single pass
Specifications
| Brand | Greenlee |
|---|---|
| Type | Hand Saws |
Questions about this item
Will the 3/8 in hex shank fit the drill chuck I already use?
The 3/8 in hex shank is designed for standard drill chucks that accept that size.
How can I confirm the 2 in hole cutter is cutting cleanly after I start using it?
Check that the 14 high-speed steel teeth produce a smooth edge at the 1/4 in maximum cutting depth.
Does the package include a replacement arbor and pilot drill or must I order them separately?
The cutter comes with a built-in arbor; replacement arbor 925-022 and pilot drill 925-002 are sold separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
