We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Greenfield Threading M12x1.75 straight flute hand tap in bright uncoated high speed steel

Greenfield Threading

Greenfield Threading 313522 Straight Flute Hand Tap M12-1.75 Plug Metric

SKU CH-MBPC-28TVS

Metric M12×1.75 straight-flute hand tap cuts internal threads in 10.30 mm holes

  • M12 x 1.75 metric thread cuts precise internal threads
  • Plug chamfer starts easily in through holes and blind holes
  • High-speed steel construction resists wear during repeated threading
  • Three flutes evacuate chips efficiently for cleaner cuts
  • 75 % thread drill size 10.30 mm guides accurate hole preparation

M12 x 1.75 Metric Hand Tap

The Greenfield Threading 313522 is a straight-flute hand tap for cutting M12 threads with a 1.75 mm pitch. It suits mechanics, fabricators and maintenance crews who need to create new internal threads or clean damaged ones in steel and similar materials.

42.06 mm Thread Length and 75 % Drill Size

The tap cuts a 42.06 mm long thread and requires a 10.30 mm drill for a 75 percent thread depth. Its three-flute high-speed steel body provides chip clearance in through-holes, but the straight-flute design limits evacuation in deep blind holes.

Plug Chamfer and D11 Thread Limit

The plug chamfer starts threads easily in through-holes and the D11 limit produces a 6H class fit. Buyers who need a bottoming chamfer for blind holes or a tighter thread class should select a different tap.

Highlights

  • M12 x 1.75 metric thread cuts precise internal threads
  • Plug chamfer starts easily in through holes and blind holes
  • High-speed steel construction resists wear during repeated threading
  • Three flutes evacuate chips efficiently for cleaner cuts
  • 75 % thread drill size 10.30 mm guides accurate hole preparation

Specifications

BrandGREENFIELD THREADING

Questions about this item

Will the 10.30 mm drill size work with my existing M12 tap set?

The 75 percent thread drill size is 10.30 mm, matching standard M12-1.75 preparation, so your current drill bits for this thread should be compatible.

How can I verify the 313522 tap is cutting correctly after setup?

Check that the straight-flute, three-flute tap produces clean threads at the 42.06 mm thread length with a 6H class of fit in the workpiece.

Does the 313522 package include a 10.30 mm drill bit or only the tap?

The box contains the M12-1.75 plug tap with 85.73 mm overall length; a 10.30 mm drill bit must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.