Graviton
Graviton ADP-66CR B 12V 5.5A 66W 5.5x2.5mm AC Adapter
Delivers 12 V at 5.5 A through a 5.5×2.5 mm barrel plug, accepting 100–240 V input and CE certified
- Delivers 66 W to power demanding devices
- 12 V 5.5 A output matches original charger specs
- 100-240 V input works worldwide without a converter
- 5×2.5 mm barrel plug fits compatible laptops and monitors
- CE certified for safety compliance
Power Output and Connector
This AC adapter delivers 12V at 5.5A for a total of 66W through a 5.5x2.5mm barrel connector. It accepts a universal input range of 100-240V at 50-60Hz, making it suitable for worldwide use. The unit carries CE certification and includes a power cord with EU, US, UK, or AU plug options.
Replacement for Delta DPS-60PB
This adapter suits owners of monitors or laptops originally powered by the Delta DPS-60PB A 12V 5A 60W unit who need a direct replacement with slightly higher current capacity. Buyers whose devices require a different output voltage, a higher amperage than 5.5A, or a proprietary connector other than 5.5x2.5mm should look at something else.
Decisive Specification: 5.5x2.5mm Plug
The single specification that decides fit is the 5.5x2.5mm barrel plug combined with the 5.5A output at 12V. If the device's service manual or original charger label calls for this exact plug size and a current draw at or below 5.5A, this 66W adapter will work. Any deviation in plug geometry or required current makes it incompatible.
Highlights
- Delivers 66 W to power demanding devices
- 12 V 5.5 A output matches original charger specs
- 100-240 V input works worldwide without a converter
- 5×2.5 mm barrel plug fits compatible laptops and monitors
- CE certified for safety compliance
Specifications
No published specifications for this item yet.
Questions about this item
What barrel-plug size does the ADP-66CR B use for the device connection?
The adapter terminates in a 5.5x2.5 mm centre-positive barrel plug that mates with the device’s DC-in jack.
How do I connect the AC adapter to mains power, and what step is often missed?
Plug the supplied IEC C7 figure-8 cord into the adapter’s inlet, then into a 100-240 V 50-60 Hz wall socket; the step often missed is fully seating the cord until it clicks.
When should I replace the power cord supplied with the adapter?
Replace the cord if the insulation is cracked, the pins are bent, or the connector no longer locks securely into the adapter inlet.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



