Graviton
Graviton AC Power Adapter TPN-LA10 19.5V 11.8A 230W 7.4*5.0mm
A 230 W AC power adapter supplying 19.5 V at 11.8 A with a 7.4 mm by 5.0 mm connector for HP 8740w, 8560 and ZBook 17 models
- Delivers 230 W for demanding HP workstations
- Wide 100-240 V input suits global travel
- 5 V 11.8 A output matches original specs
- 4×5.0 mm barrel fits ZBook 17 and 8740w
- 100 % pre-shipment tested for reliable operation
What this adapter is and who it is for
The Graviton TPN-LA10 is a 230 W AC power adapter that delivers 19.5 V at 11.8 A through a 7.4 mm by 5.0 mm barrel connector. It is built for HP mobile workstations such as the 8740w, 8560 and ZBook 17 models that require this exact voltage, current and tip size.
Check your existing setup before ordering
Confirm that the laptop you intend to power lists a 19.5 V 11.8 A 230 W requirement and uses a 7.4*5.0 mm DC jack. Verify the unit you are replacing carries the TPN-LA10 part number. The adapter accepts 100 to 240 V AC input at 50 to 60 Hz, so it works on mains supplies worldwide without a voltage switch.
Thermals noise and power draw in normal use
The brick is rated for a continuous 230 W DC output and draws its power from a 100 to 240 V AC line at 50 to 60 Hz. No fan or active cooling is mentioned in the specifications, so operation is silent. Heat output will scale with the load placed on the adapter by the connected workstation.
Highlights
- Delivers 230 W for demanding HP workstations
- Wide 100-240 V input suits global travel
- 5 V 11.8 A output matches original specs
- 4×5.0 mm barrel fits ZBook 17 and 8740w
- 100 % pre-shipment tested for reliable operation
Specifications
No published specifications for this item yet.
Questions about this item
Does the adapter ship with a mains cable or only the DC brick and 7.4×5.0 mm tip?
The listing shows no mains cable included; only the AC adapter brick with the 7.4×5.0 mm DC plug is supplied.
How do I confirm the TPN-LA10 is the correct version for my HP ZBook 17 or 8740w?
Match your original charger’s model TPN-LA10 and output 19.5 V 11.8 A 230 W; the 7.4×5.0 mm barrel must also be identical.
Will the 230 W rating actually deliver full power to an HP 8740w under load?
The adapter is rated 19.5 V at 11.8 A for 230 W continuous output, matching the 8740w’s factory specification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



