We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Graco

Graco XHD315 Airless Spray Tip 0.015 in

SKU CH-AGXP-N4A11

Airless spray tip with a 0.015 in orifice and reversible design for 7,250 psi systems

  • ColorGray
  • Precise 0.015 in tip delivers fine atomisation
  • Reversible design clears clogs without removing the tip
  • 7,250 psi rating handles high-pressure airless jobs
  • Compatible with XHD315 series sprayers for direct fit
  • Gray finish resists wear and identifies tip size

Spray Tip Size and Pattern

The Graco XHD315 airless spray tip has a 0.015 in orifice and produces a 6 in to 8 in fan pattern. It is rated for a maximum working pressure of 7,250 psi and features a reversible design for clearing blockages. The grey tip uses a 7/8 in thread connection.

Best For Fine Finishes

This tip suits painters applying thin coatings such as stains, lacquers or clear finishes where a narrow fan and small orifice are required. It is not suited for heavier materials like latex or textured coatings that demand a larger opening and wider pattern.

Check Gun Compatibility Before Buying

Verify that your airless spray gun accepts a 7/8 in threaded tip and is rated for at least 7,250 psi. The manufacturer lists compatible models including the 30, 40, 45, 46, 50, 55, 60, 70 and 80 series guns and the 287982 guard.

Highlights

  • Precise 0.015 in tip delivers fine atomisation
  • Reversible design clears clogs without removing the tip
  • 7,250 psi rating handles high-pressure airless jobs
  • Compatible with XHD315 series sprayers for direct fit
  • Gray finish resists wear and identifies tip size

Specifications

BrandGRACO
ColorGray

Questions about this item

Which Graco spray gun models accept the XHD315 tip?

The tip fits Graco guns X30DH4, X40DH4, X45DH4, X46DH4, X50DH4, X55DH4, X60DH4, X70DH4 and X80DH4.

Can I keep using my existing 7/8 in. thread guard with this tip?

Yes, the tip uses a standard 7/8 in. thread so your current guard will screw on directly.

How do I verify the tip is spraying correctly after installation?

Check for an even 6 in. to 8 in. fan pattern at up to 7,250 psi and use the reversible feature to clear any blockage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.