Graco
Graco XHD313 Airless Spray Gun Tip .013 in
Reversible airless spray tip with .013 in orifice, 6–8 in pattern and 7,250 psi rating, compatible with XHD 30–80 series guards
- ColorGray
- Precise detail work with a .013 in tip size
- Wide 6 in to 8 in pattern covers surfaces quickly
- Reversible tip clears clogs without disassembly
- Handles up to 7,250 psi for demanding coatings
- Compatible with Graco X30DH4 through X80DH4 sprayers
Graco XHD313 Airless Spray Tip .013 in
This Graco XHD313 tip is a new airless spray gun accessory with a .013 inch orifice. It produces a 6 in to 8 in pattern and fits a 7/8 in thread connection. The gray tip is rated for 7,250 psi maximum working pressure.
For contractors spraying thin coatings at high
The .013 in tip suits applicators who need a fine fan for lacquers, stains or light finishes on detail work. Painters requiring wider coverage or heavier materials such as latex or block filler should look at larger orifice sizes.
Compatibility limited to Graco XHD RAC X guards
This tip mounts only on Graco XHD RAC X tip guards with part numbers X30DH4, X40DH4, X45DH4, X46DH4, X50DH4, X55DH4, X60DH4, X70DH4 or X80DH4. It will not fit standard RAC 5, RAC IV or other brand guards.
Highlights
- Precise detail work with a .013 in tip size
- Wide 6 in to 8 in pattern covers surfaces quickly
- Reversible tip clears clogs without disassembly
- Handles up to 7,250 psi for demanding coatings
- Compatible with Graco X30DH4 through X80DH4 sprayers
Specifications
| Brand | GRACO |
|---|---|
| Color | Gray |
Questions about this item
What thread size does the Graco XHD313 tip use, and what pressure does that connection handle?
The tip uses a 7/8 In. thread and is rated for a maximum working pressure of 7,250 psi.
What guard and gun models does the .013 in tip fit?
It fits the 287978 guard and Graco XHD models X30DH4, X40DH4, X45DH4, X46DH4, X50DH4, X55DH4, X60DH4, X70DH4 and X80DH4.
How do you install the reversible tip, and what step avoids a blockage?
Thread the tip into the 287978 guard, tighten the retaining nut, then rotate the tip to the reverse position to clear a clog — skipping the rotation leaves the blockage in place.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
