Graco
Graco XHD217 Airless Spray Gun Tip .017 in
Airless spray gun tip with a .017 in orifice, 4 in to 6 in pattern and 7,250 psi rating, reversible for clearing clogs
- ColorGray
- .017 in tip produces a 4–6 in spray pattern
- Reversible design clears clogs without removing the tip
- 7,250 psi rating handles high-pressure airless jobs
- Gray colour identifies the tip size at a glance
- Compatible with Graco X30DH4 through X80DH4 spray guns
Graco XHD217 Airless Spray Gun Tip .017 in
This Graco XHD217 airless spray gun tip is designed for professional painters and contractors who need a precise .017 in orifice for fine finishing work. It produces a 4 in to 6 in pattern suitable for detailed coatings on cabinets, trim and similar surfaces. The reversible feature allows quick clearing of clogs without removing the tip from the gun. It is a new component built for demanding jobsite conditions.
Tip size .017 in with 7/8 in thread
The single specification that determines compatibility is the .017 in tip size combined with a 7/8 in thread. This orifice diameter controls the fluid flow rate and atomisation quality for the material being sprayed. The thread must match the gun’s tip guard exactly; an incorrect thread will prevent installation or cause leaks under pressure.
Works with Graco X30DH4 through X80DH4 guns
This tip fits Graco models X30DH4, X40DH4, X45DH4, X46DH4, X50DH4, X55DH4, X60DH4, X70DH4 and X80DH4 when used with the 287985 tip guard. It requires a gun and pump system rated for at least 7,250 psi maximum working pressure. Builders who need a different pattern width or orifice size should select an alternative tip from the same series.
Highlights
- .017 in tip produces a 4–6 in spray pattern
- Reversible design clears clogs without removing the tip
- 7,250 psi rating handles high-pressure airless jobs
- Gray colour identifies the tip size at a glance
- Compatible with Graco X30DH4 through X80DH4 spray guns
Specifications
| Brand | GRACO |
|---|---|
| Color | Gray |
Questions about this item
What does the .017 in tip size mean for the spray pattern once the gun is running?
The .017 in tip produces a 4 in to 6 in fan pattern, suited for medium-viscosity coatings on walls and trim.
How does the 7/8 in thread size limit which guns this tip fits?
The 7/8 in thread mates only with Graco XHD and compatible RAC guards that use the same thread pitch.
What clearance does the reversible housing need to flip for clearing a clog?
The reversible seat rotates inside the existing guard profile, so no extra wrench space beyond the installed guard is required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
