Goldwood Sound, Inc.
Goldwood Sound Theater Solutions TS425ODB 4.25" outdoor speaker set
A set of four weatherproof 4.25" passive speakers with 1" dome tweeters, 80 Hz–20 kHz response and 90 dB sensitivity, mountable indoors or out
- TypeIndoor/Outdoor Speakers
- Weather-resistant audio for patios and pools with IP-rated cabinets
- Wide 80 Hz–20 kHz frequency response from 4.25" woofers and 1" tweeters
- Handles 10–150 W per channel for flexible amplifier matching
- Simple spring-loaded wire terminals accept raw speaker cable
- Four speakers with U-brackets and hardware for quick mounting
Outdoor speaker set for distributed audio
The Theater Solutions TS425ODB package contains four passive speakers built for indoor and outdoor use. Each unit uses a 4.25 inch woofer and a 1 inch dome tweeter in a two-way design. The cabinets are sealed black ABS with rust-resistant steel grilles. A second-order 12 dB per octave crossover splits the signal internally. The set suits patios, decks, pool areas and whole-house audio systems.
Integrates with any amplifier or receiver
The speakers present an 8 ohm load and accept 10 to 150 watts per channel from your amp or stereo. Spring-loaded raw-wire terminals accept CL3 or standard speaker cable. Included U-shaped mounting brackets and hardware let you attach each speaker to walls or ceilings. No mains power or wireless pairing is required; the speakers draw all energy from the connected amplifier.
Mounting hardware and manual included
Four brackets with fasteners are supplied so installation can begin immediately. The instruction manual covers placement and wiring guidance for surround-sound, multi-room or commercial layouts. Weatherproof construction withstands rain, snow, sun and ice, keeping the drivers protected year-round. No additional accessories or software are needed to operate the system.
Highlights
- Weather-resistant audio for patios and pools with IP-rated cabinets
- Wide 80 Hz–20 kHz frequency response from 4.25" woofers and 1" tweeters
- Handles 10–150 W per channel for flexible amplifier matching
- Simple spring-loaded wire terminals accept raw speaker cable
- Four speakers with U-brackets and hardware for quick mounting
Specifications
| Brand | Theater Solutions by Goldwood |
|---|---|
| Type | Indoor/Outdoor Speakers |
Questions about this item
What is the maximum amplifier power these speakers can handle per channel?
The speakers accept up to 150 watts per channel from your amplifier or receiver.
How loud do they get when driven continuously at full volume?
They produce 90 dB sensitivity at 8 ohms, so sustained output depends on your amplifier’s actual power delivery.
What cables and amplifier outputs are required to connect the four speakers?
You need an amplifier or receiver with raw speaker-wire outputs and CL3 or raw speaker wire for each of the four passive speakers.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



