We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of slim white on-wall speakers with aluminium mesh grilles, 1.5 inches deep

Goldwood Sound, Inc.

Goldwood Sound SLM1W On-Wall Speakers Pair 5.25" White

SKU CH-1BQM-1VYJH

Slim on-wall speakers only 1.5 inches deep with 5.25-inch woofers and 91dB sensitivity for home theater or whole-house audio

  • TypeOn-Wall Speakers
  • Slim 1.5" depth mounts flush like a picture
  • 25" woofers plus 0.5" tweeters cover 60 Hz–20 kHz
  • 91 dB sensitivity works with 20–120 W amps
  • Passive wired design connects to any receiver via spring terminals
  • White ABS cabinets with aluminium grilles suit home theatre or whole-house audio

Slim On-Wall Speakers for Home Theater

The Goldwood Sound SLM1W is a pair of passive on-wall speakers only 1.5 inches deep. Each cabinet houses a 5.25 inch treated paper cone woofer and a 0.5 inch Mylar tweeter in a two-way design. They mount flush to the wall like pictures and connect to any amplifier or receiver with raw speaker wire outputs. White ABS cabinets with aluminium mesh grilles suit discreet home-theatre or whole-house audio installations.

Ideal for Discreet Surround or Multi-Room Audio

These speakers suit buyers who need slim, paintable cabinets for surround channels or background music in living rooms, offices or retail spaces. They are not for listeners who require deep bass below 60 Hz, outdoor durability, powered operation without a separate amplifier, or wireless streaming built into the speaker itself. The 91 dB sensitivity at 8 ohms works well with modest amplifiers rated between 20 and 120 watts per channel.

Simple Flush Mounting with Spring Connectors

Installation uses the recessed keyhole notch and included self-tapping screws; anti-vibration rubber pads keep the cabinet tight to the wall. Spring-loaded wire terminals and a recessed cable channel allow raw or CL3 speaker wire to sit flush for a clean finish. Common issues include using wire that is too thick for the spring clips, mounting on hollow plasterboard without proper anchors, and expecting full-range output without a separate subwoofer.

Highlights

  • Slim 1.5" depth mounts flush like a picture
  • 25" woofers plus 0.5" tweeters cover 60 Hz–20 kHz
  • 91 dB sensitivity works with 20–120 W amps
  • Passive wired design connects to any receiver via spring terminals
  • White ABS cabinets with aluminium grilles suit home theatre or whole-house audio

Specifications

BrandAcoustic Audio by Goldwood
TypeOn-Wall Speakers

Questions about this item

What amplifier power range do I need to drive the SLM1W speakers?

Your amplifier or receiver must supply between 20 and 120 watts per channel into 8 ohms to match the speakers' rated power handling.

Can I keep my existing CL3-rated speaker wire when installing these on-wall speakers?

Yes, the spring-loaded connectors accept raw speaker wire, and CL3-rated cable is explicitly listed as suitable for the in-wall runs required by the SLM1W.

How can I verify the speakers are performing correctly after mounting them?

Play a full-range test signal and confirm clean output from the 5.25" woofers down to 60 Hz and the 0.5" tweeters up to 20 kHz with no distortion at normal listening levels.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.