We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular in-wall speaker grille with dual woofers and pivoting tweeter visible behind mesh

Goldwood Sound, Inc.

Goldwood Sound, Inc. TSLCR5 Flush Mount In-Wall 8-Pack Home Audio Speakers

SKU CH-NXWQ-C07VX

Eight flush-mount in-wall speakers with dual 5.25" woofers and pivoting tweeters covering 30Hz-20kHz at 92dB sensitivity

  • TypeCenter Channel Speaker
  • Wide sound dispersion integrates with new or existing audio systems
  • Passive design driven by any home audio receiver or amplifier
  • Flush-mount Pressure Lock system clamps to drywall with no hardware needed
  • Dual 5.25" woven fiber woofers and pivoting PEI dome tweeters cover 30Hz–20 kHz at 92dB
  • Paintable ABS housings and removable grilles match your décor

Eight-Speaker In-Wall Set

This eight-piece flush-mount speaker set is built for whole-home audio or a dedicated home-theatre installation. Each unit combines dual 5.25" woven-fibre woofers with a pivoting PEI dome tweeter behind a paintable grille. The passive design draws power from any compatible receiver or amplifier.

Receiver Power And Cut-Out Dimensions

Your amplifier must deliver between 10 and 200 watts per channel into 8 ohms and provide raw speaker-wire outputs. Each speaker requires a rectangular cut-out of 16.25" x 7.5" and a mounting depth of 3.625" behind the drywall. The overall frame measures 17.625" x 8.75" and clamps in place with the Pressure Lock system, so no separate hardware is needed.

Thermal Noise And Power In Normal Use

Passive operation means the speakers generate no heat and add no fan noise to the room. The 12 dB per octave crossovers keep distortion low across the 30 Hz to 20 kHz range at the rated 92 dB sensitivity. CL3-rated wiring is approved for in-wall runs, and the infrared knock-out plug allows an optional remote receiver without breaking the vapour barrier.

Highlights

  • Wide sound dispersion integrates with new or existing audio systems
  • Passive design driven by any home audio receiver or amplifier
  • Flush-mount Pressure Lock system clamps to drywall with no hardware needed
  • Dual 5.25" woven fiber woofers and pivoting PEI dome tweeters cover 30Hz–20 kHz at 92dB
  • Paintable ABS housings and removable grilles match your décor

Specifications

BrandTheater Solutions by Goldwood
TypeCenter Channel Speaker

Questions about this item

What comes in the box and what do I need to buy separately?

The box contains eight flush-mount in-wall speakers with removable grilles and an infrared housing knock-out plug. You must supply a home audio receiver or amplifier with raw speaker wire outputs rated between 10 and 200 watts per channel, plus CL3-rated in-wall speaker wire.

Should I choose these as a center channel or for left and right positions?

These are designed as center-channel speakers with a dual 5.25-inch woofer and pivoting tweeter layout, so they work best as a centre channel or in pairs for wide dispersion; they are sold as an eight-pack for multi-room or surround installations.

What does the 92 dB sensitivity mean when the speakers are installed in my wall?

At 8 ohms the speakers produce 92 dB output for each watt of amplifier power, so a modest receiver can drive them to loud, clear levels while the flush-mount design keeps frequency response from 30 Hz to 20 kHz consistent in a real wall cavity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.