We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two rectangular white in-wall speakers with dual 6.5 inch woofers and removable grilles

Goldwood Sound, Inc.

Goldwood Sound, Inc. HD6c In-Wall Dual 6.5" Center Channel Speaker 2-Pack

SKU CH-KXT3-1PF1R

Two in-wall centre-channel speakers with dual 6.5" woofers and a 12mm tweeter cover 33Hz-22 kHz at 98dB and mount tool-free via Pressure Lock clamps

  • TypeCenter Channel Speaker
  • Dual 6.5" woofers deliver wide, full-range sound dispersion
  • 12 mm soft-dome tweeter extends high-frequency detail to 22 kHz
  • 33 Hz low-end reach adds depth to movie soundtracks
  • Pressure Lock mounting clamps to drywall with no hardware needed
  • Paintable grilles and ABS housings blend into any décor

Dual 6.5" Center Channel Pair

The Goldwood Sound HD6c set provides two flush-mount in-wall center channel speakers for home theater or whole-house audio. Each unit uses dual 6.5" woven fiber woofers and a 12mm soft dome tweeter in a passive design that draws power from an external receiver or amplifier. The pressure lock mounting system clamps to drywall without separate hardware, and the removable grilles accept paint for décor matching.

Upgrade From Single Center Or Bookshelf

Replacing a single center speaker or bookshelf pair with this dual-woofer configuration widens horizontal dispersion across the listening area. The jump is worthwhile when dialogue clarity and a broad front soundstage matter more than a compact footprint, and when the installation allows a rectangular cutout of 19.21" x 7.4" with 3.03" mounting depth. Buyers needing a smaller cutout or an active powered design should look elsewhere.

Passive Wiring And Power Limits

The speakers connect via spring-loaded raw wire terminals and require CL3-rated in-wall speaker cable from any receiver with raw speaker wire outputs. Amplifier power per channel must stay between 10 and 350 watts into 8 ohms, and the system delivers 98dB sensitivity with a 33Hz to 22kHz frequency response. Installations lacking a compatible receiver, appropriate in-wall wiring, or sufficient cavity depth cannot use this set.

Highlights

  • Dual 6.5" woofers deliver wide, full-range sound dispersion
  • 12 mm soft-dome tweeter extends high-frequency detail to 22 kHz
  • 33 Hz low-end reach adds depth to movie soundtracks
  • Pressure Lock mounting clamps to drywall with no hardware needed
  • Paintable grilles and ABS housings blend into any décor

Specifications

BrandAcoustic Audio by Goldwood
TypeCenter Channel Speaker

Questions about this item

What rectangular cut-out and mounting depth does the speaker need?

The speaker fits a 19.21" x 7.4" hole and requires 3.03" of mounting depth.

How does the Pressure Lock Mounting System secure the speaker, and what mistake should be avoided?

The clamps tighten against the drywall without any hardware; the common error is over-tightening and cracking the board.

When should the CL3-rated in-wall speaker wire be replaced?

Replace the wire if the insulation is damaged, the conductors are corroded, or you rewire the room for a different layout.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.