We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular white in-wall center speaker with dual 6.5" woofers and removable grill

Goldwood Sound, Inc.

Goldwood Sound, Inc. HD6c In-Wall 6.5" Center Channel Speaker

SKU CH-3HXX-0DS3E

A flush-mount in-wall center channel with dual 6.5" woven-fiber woofers and a 12mm soft-dome tweeter, covering 33Hz-22kHz at 98dB sensitivity and 8 ohms

  • TypeCenter Channel Speaker
  • Wide sound dispersion fills the room evenly
  • Dual 6.5" woofers deliver deep bass down to 33Hz
  • 12mm soft dome tweeter extends clarity to 22kHz
  • Pressure Lock mounting clamps to drywall with no hardware
  • Paintable grilles and ABS housings blend with any décor

Center Channel for Home Theater

The Goldwood Sound HD6c is a flush-mount in-wall center channel speaker built for home theater surround systems. It uses a traditional passive design that draws power from any home audio receiver or amplifier with raw speaker wire outputs. Dual 6.5-inch woven fiber woofers and a 12mm soft dome tweeter deliver full-range sound coverage. The durable ABS housing and removable grilles can be painted to match the surrounding décor.

Upgrade from Basic TV Audio

This speaker replaces standard television speakers or a missing center channel in an existing surround setup. The jump is worth it when dialogue clarity and wide sound dispersion are needed for a front-and-rear, right-and-left home theater configuration. It integrates easily with new or existing audio systems using the same receiver or amplifier. Buyers who want a powered soundbar with built-in streaming or HDMI connectivity will not find those features here.

Limits of Passive In-Wall Design

The speaker requires an amplifier providing between 10 and 350 watts per channel and CL3-rated in-wall speaker wire for the connection. Installation demands a rectangular cutout of 19.21 by 7.4 inches with a mounting depth of 3.03 inches, secured by the Pressure Lock Mounting System that clamps to drywall without separate hardware. The overall dimensions are 20.47 by 8.66 inches. Frequency response spans 33Hz to 22 kHz at 98dB sensitivity and 8-ohm impedance.

Highlights

  • Wide sound dispersion fills the room evenly
  • Dual 6.5" woofers deliver deep bass down to 33Hz
  • 12mm soft dome tweeter extends clarity to 22kHz
  • Pressure Lock mounting clamps to drywall with no hardware
  • Paintable grilles and ABS housings blend with any décor

Specifications

BrandAcoustic Audio by Goldwood
TypeCenter Channel Speaker

Questions about this item

What rectangular cut-out and mounting depth does the HD6c center channel need?

The speaker fits a 19.21" x 7.4" hole and requires a 3.03" mounting depth behind the drywall.

How does the Pressure Lock Mounting System secure the speaker, and what mistake should be avoided?

Clamps tighten against the drywall with no hardware needed; the common error is over-tightening and cracking the board.

When will the removable grilles need attention, and what is safe to do?

Grilles can be painted to match décor at any time; simply remove, paint, and reattach — no driver maintenance is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.