We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of white frameless in-ceiling speakers with magnetic paintable grilles

Goldwood Sound, Inc.

Goldwood Sound, Inc. CSic64 Frameless In-Ceiling 6.5" Speaker Pair 3-Way Home Audio Speakers

SKU CH-PPEJ-RC0RD

Frameless in-ceiling pair with 6.5" 3-way drivers, 45Hz-20kHz response and 92dB sensitivity for flush-mount home audio

  • TypeIn-Ceiling Speakers
  • Wide sound dispersion integrates easily with new or existing audio systems
  • Frameless magnetic grilles paint to match any ceiling finish
  • 3-way design with 6.5" poly woofers, Mylar midranges and 0.5" tweeters covers 45 Hz to 20 kHz
  • Pressure Lock mounting clamps to drywall with no hardware needed
  • Handles 10 to 250 watts per channel from any home receiver or amplifier

Frameless In-Ceiling Speaker Pair

This frameless in-ceiling speaker pair installs flush for a clean look and wide sound dispersion. The 3-way design uses a 6.5" poly cone woofer, a Mylar midrange and a .5" Mylar tweeter to cover 45Hz-20 kHz at 92dB. It is built for buyers who want whole-home audio without visible cabinets.

Capacity and Headroom

Each speaker handles 10 to 250 watts per channel from any home audio receiver or amplifier with raw wire outputs. The 3-way passive crossovers keep fidelity steady across the band. The system runs out of headroom if the amplifier exceeds 250 watts or drops below 10 watts per channel.

Pressure Lock Mounting and Paintable Grills

The Pressure Lock Mounting System clamps to drywall with no extra hardware needed, fitting an 8.27" cut-out at 2.99" depth. Magnetically attached edge-to-edge grills can be painted to match the ceiling. CL3 rated in-wall speaker wire is required to complete the installation.

Highlights

  • Wide sound dispersion integrates easily with new or existing audio systems
  • Frameless magnetic grilles paint to match any ceiling finish
  • 3-way design with 6.5" poly woofers, Mylar midranges and 0.5" tweeters covers 45 Hz to 20 kHz
  • Pressure Lock mounting clamps to drywall with no hardware needed
  • Handles 10 to 250 watts per channel from any home receiver or amplifier

Specifications

BrandAcoustic Audio by Goldwood
TypeIn-Ceiling Speakers

Questions about this item

Will the CSic64 6.5" speakers work with my older stereo receiver that only puts out 20 watts per channel?

Yes, the minimum recommended power is 10 watts per channel, so a 20-watt receiver is sufficient to drive the pair properly.

How can I confirm the CSic64 in-ceiling pair is performing correctly once installed?

Play test tones across the 45Hz-20 kHz range; the 92dB sensitivity at 8 ohms should deliver clear, balanced output from the woofer, midrange and tweeter.

What comes in the box with the CSic64 frameless speaker pair and what must I purchase separately?

The set includes two speakers with magnetic grilles and the Pressure Lock mounting system; you must buy CL3-rated speaker wire and an amplifier or receiver separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.