Goldwood Sound, Inc.
Goldwood Sound, Inc. Acoustic Audio R192 8-pack in-ceiling speakers
Eight frameless in-ceiling speakers with 5.25″ woofers and 0.5″ tweeters cover 45 Hz–22 kHz at 95 dB and mount tool-free in 7.01″ holes
- TypeIn-Ceiling Speakers
- Wide coverage from 45 Hz to 22 kHz frequency response
- Clean frameless look with paintable magnetic grilles
- Tool-free install using Pressure Lock mounting system
- 25" poly woofers and 0.5" Mylar tweeters for full-range sound
- Handles 10 to 200 watts per channel from any receiver
Frameless 8-Speaker In-Ceiling Set
The Acoustic Audio R192 pack supplies eight frameless two-way speakers for whole-home audio or multi-room surround installations. Each unit uses a 5.25" poly cone woofer and a .5" Mylar tweeter behind a paintable magnetic grill that sits flush with the ceiling. The Pressure Lock Mounting System clamps directly to drywall without separate hardware, fitting a 7.01" cut-out and 2.95" mounting depth. Frequency response reaches 45Hz-22 kHz at 95dB sensitivity with an 8-ohm load.
Upgrade from Visible Box Speakers
This set replaces bulky floor-standing or bookshelf cabinets that occupy floor space and clash with décor. The jump is worth it when you want immersive sound that disappears into the architecture, especially in open-plan living areas, finished basements or dedicated theatre rooms where a clean sightline matters more than portable placement.
Suits Permanent Installs with Adequate Amplification
These speakers suit owners planning a permanent in-ceiling layout driven by a receiver delivering between 10 and 200 watts per channel through CL3-rated speaker wire. They do not suit renters who cannot cut drywall, buyers who need powered or wireless units, or systems that demand higher power handling or weather-resistant construction for outdoor zones.
Highlights
- Wide coverage from 45 Hz to 22 kHz frequency response
- Clean frameless look with paintable magnetic grilles
- Tool-free install using Pressure Lock mounting system
- 25" poly woofers and 0.5" Mylar tweeters for full-range sound
- Handles 10 to 200 watts per channel from any receiver
Specifications
| Brand | Acoustic Audio by Goldwood |
|---|---|
| Type | In-Ceiling Speakers |
Questions about this item
What ceiling cut-out diameter and mounting depth does each R192 speaker require?
Each speaker fits a 7.01-inch round hole and needs 2.95 inches of clearance behind the drywall for the flush-mount housing.
How does the Pressure Lock Mounting System secure the speakers, and what common mistake should installers avoid?
Spring-loaded clamps expand behind the drywall when you turn the mounting screws; the mistake is over-tightening, which can crack the plasterboard instead of locking the frame.
When should the butyl rubber surrounds on the 5.25-inch woofers be inspected or replaced?
Butyl rubber resists drying for many years; inspect the surrounds if bass response drops or distortion appears, typically after a decade or more of normal use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



