Goldwood Sound, Inc.
Goldwood Sound GW-6024 6.5" 170W 4ohm PA Speaker (4-pack)
Four 6.5" PA woofers deliver 170 W peak power each with 29–4800 Hz response and 89 dB sensitivity
- TypeSpeaker
- Clear mid-range output from 29 Hz low end
- Strong 170 W peak power for live venues
- Consistent 89 dB sensitivity across the band
- Durable 20 oz magnet with vented pole piece
- Four speakers included for stereo or multi-room setups
Four 6.5" woofers for PA and live sound
This pack contains four Goldwood Sound GW-6024 woofers rated at 90 watts RMS and 170 watts maximum each. They present a 4 ohm impedance and use 1.5 inch aluminium voice coils with 20 ounce magnets. The cones are poly mica with butyl rubber surrounds mounted on stamped steel frames. Applications include pro DJ, PA, karaoke, live sound, fixed installation, studio monitor and home audio.
Check amplifier impedance and enclosure cutout
Your amplifier must be stable driving a 4 ohm load for each woofer. Each unit needs a circular cutout of 5.71 inches and 3.01 inches of mounting depth behind the panel. Verify the available air volume and port tuning of your cabinet matches the 29 to 4800 Hz frequency response and 89 dB sensitivity. Ensure wiring can handle the combined current draw of four drivers.
Sustained output stays within thermal limits
The 90 watt RMS rating reflects continuous power handling without thermal compression. Vented pole pieces and bumper plates help dissipate heat during extended sets. Butyl rubber surrounds resist fatigue better than foam under prolonged excursion. The stamped steel frame maintains alignment when driven at high output for hours, keeping distortion low across the rated bandwidth.
Highlights
- Clear mid-range output from 29 Hz low end
- Strong 170 W peak power for live venues
- Consistent 89 dB sensitivity across the band
- Durable 20 oz magnet with vented pole piece
- Four speakers included for stereo or multi-room setups
Specifications
| Brand | Goldwood |
|---|---|
| Type | Speaker |
Questions about this item
What is included in the box and what else is needed to use the speakers?
The pack contains four GW-6024 6.5" woofers with 1.5" aluminum voice coils, 20oz magnets and poly mica cones. You must supply a suitable enclosure cut to 5.71" hole size with 3.01" mounting depth and an amplifier that can drive 4 ohm loads.
How do I decide between the RMS and max power ratings for my amplifier?
Each driver handles 90 watts RMS and 170 watts max; choose an amplifier rated around 90 watts per channel into 4 ohms for clean continuous output, or up to 170 watts for peak headroom.
What does the 89 dB sensitivity mean once the drivers are installed in a cabinet?
At one metre with one watt input each driver produces 89 dB, giving a clear reference for how loud the system will play with a given amplifier.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



