We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of 8 inch black woofers with silver cones and foam surrounds on metal frames

Goldwood Sound, Inc.

Goldwood Sound GW-208/8 8" Woofer Pair 200 W 8 Ω

SKU CH-W8GR-RZ5XH

A pair of 8-inch PA woofers handling 100 watts RMS with a 45–7000 Hz response and 88 dB sensitivity

  • TypeSpeaker
  • 8" woofers deliver 100 W RMS continuous power for reliable PA performance
  • 45–7000 Hz frequency response covers vocals and instruments clearly
  • 88 dB SPL sensitivity produces loud output with modest amplifier power
  • 5" aluminum voice coils handle 200 W peak without overheating
  • Pair includes two 8 Ω drivers for flexible stereo or mono wiring

Pair of 8-inch PA woofers

This pair of Goldwood Sound GW-208/8 woofers is built for pro-audio cabinets, DJ rigs, karaoke systems, live-sound reinforcement, fixed installations, studio monitors or home-audio projects. Each driver handles 100 watts RMS and 200 watts maximum, so a two-way or multi-way design gets consistent output without needing a separate amplifier channel per box.

Sustained output at 100 watts RMS

At the rated 100 watts RMS the 1.5-inch aluminum voice coils dissipate heat through the vented pole pieces, keeping compression low during long sets. The 45 to 7000 Hz response and 88 dB sensitivity mean mid-bass stays clean at gig levels, while the rolled foam surrounds resist fatigue from repeated high-excursion cycles.

Stamped steel frames with standard cut-out

Stamped steel frames mount into a 7.2-inch cut-out with a 3.36-inch mounting depth, fitting most 8-inch enclosure designs without modification. The 8-ohm impedance works with common crossover networks and amplifier channels, and the poly-laminated cones with 20-ounce magnets survive transport and permanent install alike.

Highlights

  • 8" woofers deliver 100 W RMS continuous power for reliable PA performance
  • 45–7000 Hz frequency response covers vocals and instruments clearly
  • 88 dB SPL sensitivity produces loud output with modest amplifier power
  • 5" aluminum voice coils handle 200 W peak without overheating
  • Pair includes two 8 Ω drivers for flexible stereo or mono wiring

Specifications

BrandGoldwood
TypeSpeaker

Questions about this item

How much heat or power draw should I expect from the 1.5" voice coils during all-day PA use?

Each woofer handles 100 W RMS and 200 W max, so sustained output stays within that thermal limit; the 20 oz magnet structure and vented pole piece help dissipate heat during long sessions.

What enclosure cutout and mounting depth do I need to have ready before installing the pair?

The drivers require a 7.2" mounting hole and 3.36" of clearance behind the baffle; the stamped steel frames bolt directly to standard PA cabinets.

Will the 8 Ω impedance and 88 dB sensitivity match my older 8 Ω crossover and amplifier without re-wiring?

Yes, each woofer presents an 8 Ω load and 88 dB SPL, so they work with existing 8 Ω crossovers and amps rated for that impedance and sensitivity range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.