We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6.5 inch PA speaker driver with silver magnet and rolled foam surround

Goldwood Sound, Inc.

Goldwood Sound GW-206/4 6.5" PA speaker 180W 4ohm

SKU CH-EXHJ-SWQMB

A 6.5" PA woofer handling 90 W RMS with 88 dB sensitivity and a 56–8000 Hz range, built with a 20 oz magnet, 1.5" aluminum voice coil and poly-laminated cone for live sound, DJ.

  • TypeSpeaker
  • Handles 90W RMS for clean output
  • 180W max power for dynamic peaks
  • 56–8000Hz range covers vocals and instruments
  • 88dB sensitivity yields loud sound efficiently
  • 4ohm impedance suits pro PA amplifiers

Speaker type and intended use

The Goldwood Sound GW-206/4 is a 6.5-inch PA woofer rated at 90 watts RMS and 180 watts maximum power with a 4 ohm impedance. It is built for pro DJ, PA, karaoke, live sound, fixed installation, studio monitor and home audio applications.

Installation fit and common issues

The driver requires a 5.71-inch enclosure cut-out and 3.01 inches of mounting depth behind the baffle. Installers must verify these dimensions before cutting; a hole that is too large or insufficient depth will prevent a secure seal and degrade low-frequency output.

Sustained-load behaviour

With a 20oz magnet, 1.5-inch aluminum voice coil and vented pole piece, the woofer maintains its 88 dB sensitivity across the 56 to 8000 Hz range during extended use. The poly-laminated cone and rolled foam surround resist thermal compression so output stays consistent through long sets.

Highlights

  • Handles 90W RMS for clean output
  • 180W max power for dynamic peaks
  • 56–8000Hz range covers vocals and instruments
  • 88dB sensitivity yields loud sound efficiently
  • 4ohm impedance suits pro PA amplifiers

Specifications

BrandGoldwood
TypeSpeaker

Questions about this item

How can I verify the GW-206/4 is performing correctly after installation?

Play audio through the speaker and listen for clear output across the 56 to 8000 Hz range with no distortion at normal volumes; the 88 dB SPL rating and 90 W RMS handling indicate it should reach loud levels cleanly when driven by a suitable amplifier.

What comes with the GW-206/4 and what must I provide separately?

The box contains one Goldwood GW-206/4 6.5" woofer with a 20 oz magnet, 1.5" aluminum voice coil, poly-laminated cone, rolled foam surround and stamped steel frame; you must supply an enclosure with a 5.71" cutout, 3.01" mounting depth, wiring and an amplifier capable of 4 ohm loads.

Which version of the GW-206/4 should I choose for my PA system?

This model is a single 4 ohm variant rated at 90 W RMS and 180 W max; select it when your amplifier delivers up to 180 W into 4 ohms per channel — if your amp requires 8 ohms or a different power rating, choose a matching speaker instead.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.