Goldwood Sound, Inc.
Goldwood Sound GT-324 Titanium Dome Tweeters 40 pcs 120W 8ohm PA speaker
Forty titanium-dome tweeters rated at 60 watts RMS and 120 watts maximum with 94 dB sensitivity and 8-ohm impedance
- TypeSpeaker
- 40 tweeters supply a complete PA system upgrade
- 120 W peak power handles demanding live sound
- 94 dB SPL delivers clear high-frequency output
- 94 in round frame fits standard 3 in cut-outs
- Titanium dome cones extend response to 25,000 Hz
Titanium Dome Tweeter Array
This pack contains forty Goldwood Sound GT-324 titanium dome tweeters rated at 60 watts RMS and 120 watts maximum each. They present an 8 ohm impedance and a 94 dB SPL sensitivity across a 3500 to 25000 Hz frequency response. Each unit uses a 1 inch voice coil and an 8 ounce magnet. The round frame measures 3.94 inches and fits a 3 inch enclosure hole with a 1 inch mounting depth.
Suited For Multi Driver Builds
Installers fitting large PA, DJ, karaoke or fixed installation systems will appreciate the consistent voicing across forty matched drivers. Studio monitor and home audio builders needing a bright, detailed top end can also use them. Buyers who need a single replacement tweeter or a smaller quantity should look at other listings because this package is fixed at forty pieces.
Sustained High Output Behaviour
The 60 watt RMS rating indicates the thermal limit for continuous programme material without overheating the voice coil. During extended high level playback the titanium dome and 8 ounce magnet structure dissipate heat to maintain output stability. The 120 watt peak figure covers short musical transients only; running at that level continuously will exceed the thermal design.
Highlights
- 40 tweeters supply a complete PA system upgrade
- 120 W peak power handles demanding live sound
- 94 dB SPL delivers clear high-frequency output
- 94 in round frame fits standard 3 in cut-outs
- Titanium dome cones extend response to 25,000 Hz
Specifications
| Brand | Goldwood |
|---|---|
| Type | Speaker |
Questions about this item
What crossover components are needed so the GT-324 tweeters operate correctly within the 3500 to 25000Hz range?
A high-pass crossover set above 3500Hz is required; the 1 inch voice coil and 8ohm impedance determine the capacitor or inductor values for your cabinet design.
Will the 3.94 inch round GT-324 fit the 3 inch cut-outs in my existing speaker enclosures?
Yes, each tweeter is designed for a 3 inch enclosure hole and the 3.94 inch overall diameter covers the opening with a standard mounting depth of 1 inch.
How can I verify the 94 dB SPL output after installing all 40 units?
Play a test tone within the 3500 to 25000Hz range at 1 metre on-axis and measure with a calibrated SPL meter; consistent 94 dB readings confirm the titanium dome tweeters are functioning as specified.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



