GoHardDrive
GoHardDrive 4TB 64MB 5900 RPM 3.5" SATA 6.0Gb/s Surveillance internal hard drive
A 4 TB 3.5-inch SATA surveillance drive with 64 MB cache spinning at 5900 RPM for continuous video recording
- InterfaceSATA 6.0Gb/s
- Capacity4TB
- RPM5900 RPM
- Cache64MB
- UsageFor Video Surveillance
- Form Factor3.5"
- 4TB capacity stores weeks of surveillance footage
- 5900 RPM spindle speed reduces heat in always-on recorders
- 64MB cache buffers continuous multi-stream video writes
- SATA 6.0Gb/s interface connects directly to DVR and NVR bays
- 5-inch form factor fits standard desktop and surveillance chassis
GoHardDrive 4TB Surveillance Drive
This 3.5-inch internal hard drive delivers 4TB of storage through a SATA 6.0Gb/s interface. It spins at 5900 RPM with a 64MB cache and is sold new for continuous video recording workloads.
Suits CCTV DVR and security-system builds
The firmware and rotational speed are tuned for sequential write streams typical of surveillance recording. It is not suited for primary operating-system drives or workloads that demand low random-access latency.
5900 RPM rotational speed
This fixed spindle speed determines the sustained throughput available for multiple camera streams. Buyers who need higher random IOPS for database or boot tasks should consider a different drive class.
Highlights
- 4TB capacity stores weeks of surveillance footage
- 5900 RPM spindle speed reduces heat in always-on recorders
- 64MB cache buffers continuous multi-stream video writes
- SATA 6.0Gb/s interface connects directly to DVR and NVR bays
- 5-inch form factor fits standard desktop and surveillance chassis
Specifications
| Interface | SATA 6.0Gb/s |
|---|---|
| Capacity | 4TB |
| RPM | 5900 RPM |
| Cache | 64MB |
| Usage | For Video Surveillance |
| Form Factor | 3.5" |
Questions about this item
What practical throughput limit does the SATA 6.0Gb/s interface impose on this drive?
The SATA 6.0Gb/s link caps the maximum burst transfer rate at 6.0 gigabits per second, though sustained speeds will be lower due to the 5900 RPM spindle speed.
Which bay dimensions and screw pattern does the 3.5" form factor require?
This drive needs a standard 3.5-inch drive bay with the industry-standard bottom and side mounting holes spaced for 3.5" drives.
How is the drive installed in a DVR or PC, and which step is commonly missed?
Connect the SATA data cable and SATA power connector, secure the drive with four screws, then ensure the DVR or BIOS recognises the new volume before recording.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



