We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black adapter unit with digital voltage and current display screen and multiple connector ports

GODIAG

GODIAG GT107 DSG Plus Measurement Tool DQ250 DQ200 VL381 VL300 DQ500 DL501

SKU CH-0FWF-X32JW MPN GT107

DSG gearbox adapter reads, writes and diagnoses ECU data for DQ200, DQ250, VL300, VL381, DQ500 and DL501 units with voltage and current display

  • Size/DimensionsInch: 9.06*4.33*1.57
  • TypeTest Equipment
  • FeaturesUse our GODIAG car ECU programmer adapter to read, write and
  • Connects VAG gearbox ECUs including DQ250 and DQ500
  • Voltage display reveals short circuits or wiring faults
  • Current display monitors gearbox ECU operating current
  • Works with PCMFlash, PCMTuner and Kess V2 software
  • Compact adapter measures 9.06 by 4.33 by 1.57 inches

DSG gearbox ECU adapter

The GODIAG GT107 DSG Plus connects VAG-series dual-clutch gearbox ECUs to a PC for cloning, diagnosis and data editing. It supports DQ250, DQ200, VL381, VL300, DQ500 and DL501 units plus Benz and BMW applications. Power is drawn from the vehicle battery during operation. The adapter works with PCMFlash, PCMTuner, Kess V2 and similar software.

For transmission specialists.

Workshops that read, write or repair DSG gearbox control units will use the voltage and current display to verify communication and spot wiring faults. Technicians who only need generic OBD-II fault-code scanning or engine ECU programming should look at a different tool. The adapter does not support non-DSG transmissions or non-listed manufacturers.

Voltage and current readout

A built-in display shows the gearbox ECU operating voltage and current draw in real time. A sharp voltage drop flags a short circuit or incorrect wiring before data is corrupted. This single measurement lets the user confirm a healthy connection before starting any read or write sequence. Dimensions are 9.06 by 4.33 by 1.57 inches.

Highlights

  • Connects VAG gearbox ECUs including DQ250 and DQ500
  • Voltage display reveals short circuits or wiring faults
  • Current display monitors gearbox ECU operating current
  • Works with PCMFlash, PCMTuner and Kess V2 software
  • Compact adapter measures 9.06 by 4.33 by 1.57 inches

Specifications

BrandGODIAG
ModelGT107 DSG Plus
Part NumberGT107
Size/DimensionsInch: 9.06*4.33*1.57
TypeTest Equipment
FeaturesUse our GODIAG car ECU programmer adapter to read, write and adjust data for the ECU of DSG transmission with software such as PCMFlash, PCMTuner and Kess V2 and etc.

Questions about this item

Which DSG gearbox ECUs does the GT107 DSG Plus adapter support?

The adapter connects VAG series gearbox ECUs including DQ250, DQ200, VL381, VL300, DQ500 and DL501, plus Benz and BMW units.

What does the voltage and current display show while the adapter is connected to a gearbox ECU?

It shows the ECU operating voltage and working current; a severe voltage drop can indicate a short circuit or incorrect wiring.

Which software packages can be used with the GT107 DSG Plus for reading and writing gearbox data?

PCMFlash, PCMTuner and Kess V2 are supported, with automatic or manual selection depending on the software.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.