We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A compact metal network switch with ten front-facing ports and a clean fanless finish

Goalake 10 Port Managed PoE Switch 8×100M 2×1000M 120W 250m VLAN QoS Fanless

SKU CH-BPA6-0YKH3

A 10-port managed PoE switch with eight 100M PoE ports, two 1000M uplinks, 120W budget, 250m extend, VLAN and QoS in a fanless metal case

  • FormatDesktop
  • Network Management TypeUnmanaged
  • Uplink Ports8
  • Primary Port Count10
  • Primary Ports16 x SFP + 8 x RJ45
  • Management Feature10 Port PoE Switch, 1 Power Cord, User Manual
  • 120 W total PoE budget powers eight 100 Mbps ports at up to 30 W each
  • Two 1000 Mbps uplinks provide high-speed backbone connectivity for the network
  • 250 m extend mode pushes PoE and data far beyond standard cable limits
  • Web and app management with VLAN and QoS gives full traffic control without extra hardware
  • Fanless metal chassis runs silently on desktop or wall for noise-sensitive spaces

10-Port Managed PoE Switch

The Goalake switch provides ten Ethernet ports with eight 100 Mbps PoE ports and two 1000 Mbps uplink ports. It delivers up to 30W per PoE port with a total 120W power budget compliant with IEEE 802.3af/at standards. The fanless metal chassis supports desktop or wall mounting for quiet operation in offices or homes.

Managed and Unmanaged Modes

The switch operates in managed mode with web and app access for VLAN, QoS, and port mirroring configuration. It also functions as an unmanaged plug-and-play device for immediate deployment. Built-in 250m extend mode supports longer cable runs for cameras and access points. The 768KB buffer and 9216 byte jumbo frames handle traffic bursts smoothly.

Suits Surveillance and Small Business Networks

This unit fits installers needing PoE for IP cameras, wireless access points, and VoIP phones with management features. Buyers requiring 2.5G or 10G uplink speeds should look elsewhere. Networks needing SFP fibre uplinks or Layer 3 routing capabilities are not supported by this model.

Highlights

  • 120 W total PoE budget powers eight 100 Mbps ports at up to 30 W each
  • Two 1000 Mbps uplinks provide high-speed backbone connectivity for the network
  • 250 m extend mode pushes PoE and data far beyond standard cable limits
  • Web and app management with VLAN and QoS gives full traffic control without extra hardware
  • Fanless metal chassis runs silently on desktop or wall for noise-sensitive spaces

Specifications

BrandNETGEAR
SeriesProSafe
Part NumberPS208G
FormatDesktop
Network Management TypeUnmanaged
Uplink Ports8
Primary Port Count10
Primary Ports16 x SFP + 8 x RJ45
Management Feature10 Port PoE Switch, 1 Power Cord, User Manual
Jumbo Frames9216 bytes
Packet Forwarding Rate2 gigabits_per_second
Buffer Memory768KB
IPv4 FeaturesNO SFP
PoENo
SNMPNo
Layer1
Layer 2 Features2 gigabits_per_second, 10
Layer 3 Features10 Ports (8 PoE) / 120W Managed
Module SupportNo
PoE Power BudgetNO SFP
Dimensions14.33in W x 12.83in H x 9.06in D
Certificationnot_applicable
Max Heat Dissipation120 watts
Features10, 10 Port PoE Switch, 1 Power Cord, User Manual, 2 gigabits_per_second, Metal, Blue
Package Contents10 Port PoE Switch, 1 Power Cord, User Manual

Questions about this item

How many PoE ports hit the 30 W per-port ceiling before the 120 W budget is exhausted?

Each of the eight PoE ports can draw up to 30 W, so four ports at maximum load will consume the full 120 W budget.

Does the fanless metal enclosure stay quiet and cool during continuous 120 W PoE delivery?

The fanless design relies on passive metal cooling; it runs silently, and the chassis dissipates heat from the 120 W PoE budget without active airflow.

Which cables and powered devices must I already have to use the eight 100 Mbps PoE ports and two 1000 Mbps uplinks?

You need Cat5e or better Ethernet cables plus PoE-ready devices such as IP cameras or access points that accept IEEE 802.3af/at power on the eight 100 Mbps ports, and standard Gigabit links for the two uplink ports.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.