We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Royal blue silk PLA filament on a 1 kg spool

GIANTARM GIANTARM-1247 Silk Royal Blue PLA Filament 1.75mm 1kg

SKU CH-QJAY-9F0QN

Silk Royal Blue PLA filament on a 1 kg spool with 1.75 mm diameter and ±0.03 mm tolerance prints at 190–215 °C for a glossy, tangle-free finish

  • ColorSilk Royal Blue Pla
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight1 kilograms
  • Silk-like glossy finish straight off the printer
  • Dimensional accuracy held within ±0.03 mm
  • 24-hour drying and vacuum seal prevent clogs and bubbles
  • Works with most FDM printers and 3D pens
  • 1 kg spool provides approximately 330 metres of filament

Silk Royal Blue PLA Filament 1.75mm

This 1 kg spool of GIANTARM GIANTARM-1247 Silk Royal Blue PLA filament delivers a glossy silk-like finish straight from the printer. The polylactic acid material produces smooth, shiny surfaces without post-processing. It suits makers, hobbyists and educators who want eye-catching prints with minimal fuss.

Check printer compatibility and settings

Verify your FDM 3D printer or 3D pen accepts 1.75 mm filament before ordering. The manufacturer recommends a nozzle temperature between 190 and 215 °C and a bed temperature of 40 to 60 °C. Print speeds of 40 to 60 mm/s are suggested for best results. Ensure your hot-end can reach the required range.

Vacuum-sealed spool with desiccant

Each spool is dried for 24 hours then vacuum packed with desiccant in a resealable nylon bag to prevent moisture absorption. The spool measures 7.8 inches in diameter, 2.5 inches wide with a 2.30 inch hub hole, fitting most standard holders. Mechanical winding and manual inspection reduce tangles and ensure consistent feeding. Return unused filament to the bag after printing to maintain quality.

Highlights

  • Silk-like glossy finish straight off the printer
  • Dimensional accuracy held within ±0.03 mm
  • 24-hour drying and vacuum seal prevent clogs and bubbles
  • Works with most FDM printers and 3D pens
  • 1 kg spool provides approximately 330 metres of filament

Specifications

BrandGIANTARM
ModelGIANTARM-1247
ColorSilk Royal Blue Pla
MaterialPolylactic Acid
Diameter1.75
Weight1 kilograms

Questions about this item

What comes in the box and do I need to buy a spool holder separately?

The box contains one vacuum-sealed 1 kg spool of Silk Royal Blue PLA filament plus a resealable storage bag with desiccant; the spool hub hole is 2.30 inches so it fits most standard holders without an extra purchase.

How do I choose between the 1.75 mm diameter and other sizes?

This product is supplied only in 1.75 mm diameter with a ±0.03 mm tolerance; if your printer requires a different diameter you would need a different filament.

What does the 195–230 °C print temperature range mean for everyday printing?

It means the filament melts reliably between 195 °C and 230 °C, so you can set your nozzle anywhere in that window — typically 190–215 °C — and print at 40–60 mm/s for consistent, bubble-free layers.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.