We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
GIANTARM Silk Silver PLA filament 1kg spool 1.75mm diameter

GIANTARM 700-001-1202 Silk Silver PLA Filament 1kg 1.75mm

SKU CH-BC51-VXBZG

Silk silver PLA filament on a 1 kg spool with ±0.03 mm accuracy and vacuum-sealed, moisture-controlled packaging

  • ColorSilk Silver
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight1 kilograms
  • Silk metallic finish needs no polishing
  • Toughness enhanced for functional parts
  • Dimensional accuracy ±0.03 mm on 1.75 mm filament
  • Vacuum sealed after 24 h drying for clog-free printing
  • Mechanical winding and larger spool core reduce tangles

Silk Metallic Silver PLA Filament

This 1.75 mm Polylactic Acid spool weighs 1 kilogram and delivers a shiny silk finish straight from the printer. Makers who want metallic-looking models without post-processing will appreciate the consistent surface quality. It suits decorative prints, cosplay props and display pieces where appearance matters more than structural load. Buyers needing high-temperature resistance or engineering-grade strength should choose a different material.

Dimensional Accuracy and Moisture Control

The filament is manufactured to a tolerance of +/- 0.03 mm using CCD measurement and self-adaptive control. Each spool is dried for 24 hours before vacuum sealing with desiccant to prevent moisture uptake. After opening, the supplier recommends storage in a re-sealable foil bag to maintain print stability. Users without dry storage or active filament dryers may see degraded layer adhesion over time.

Mechanical Winding and Spool Design

Full mechanical winding and manual inspection reduce tangles and lower the risk of mid-print snaps. A larger inner spool diameter promotes smoother feeding across a range of FDM extruders. The 1 kilogram roll provides approximately 1080 feet of material for extended print runs. Printers with restrictive filament paths or very small drive gears may still require careful spool positioning.

Highlights

  • Silk metallic finish needs no polishing
  • Toughness enhanced for functional parts
  • Dimensional accuracy ±0.03 mm on 1.75 mm filament
  • Vacuum sealed after 24 h drying for clog-free printing
  • Mechanical winding and larger spool core reduce tangles

Specifications

BrandGIANTARM
Model700-001-1202
ColorSilk Silver
MaterialPolylactic Acid
Diameter1.75
Weight1 kilograms

Questions about this item

Which diameter tolerance matters for consistent extrusion on a 1.75 mm spool?

The filament is manufactured to ±0.03 mm accuracy, keeping the 1.75 mm diameter steady across the full 1 kg roll for reliable feeding.

What does the 1080 foot length mean for print time on a typical FDM printer?

At 1.75 mm diameter the 1 kg spool provides roughly 1080 feet of material, enough for many medium-sized prints before a changeover.

How does the vacuum-sealed packaging with desiccant affect moisture sensitivity of this PLA?

The spool is dried for 24 hours then vacuum sealed with desiccant, so it arrives dry and prints cleanly; reseal in the foil bag after opening to keep it that way.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.