GESEXI MK0253 7in 12V 80W 800CFM 2900RPM Industrial Cooling Fan 2 Pack
A 7-inch 12V 80W industrial cooling fan kit with 800 CFM airflow, 2900 RPM speed and reversible puller or pusher mounting
- High airflow of 800 CFM keeps engines cool
- 12 V 80 W motor delivers strong performance at 2900 RPM
- Slim 2.64 in profile fits tight engine bays
- Reversible puller or pusher design adapts to any setup
- Complete mounting kit with 10 blades enables fast installation
Dual 7-Inch 12 V 80 W Industrial Fans
This two-pack supplies a pair of 7-inch electric radiator cooling fans rated at 12 V and 80 W each. They are built for universal fitment on vehicles, agricultural machinery, greenhouses and attic ventilation where forced-air heat removal is required.
Slim Profile With Reversible Airflow
Each unit measures 2.64 inches thick, leaving extra clearance in tight engine bays or equipment housings. The motor can be wired as a puller or pusher simply by reversing the power leads and flipping the ten-blade rotor, while the included rods, clips, foam pads, feet and springs secure the assembly to radiators, oil coolers, transmission coolers or condensers.
Steady 800 CFM At 2,900 RPM
Factory dynamic balancing lets the fan sustain 800 CFM at 2,900 RPM during continuous operation without vibration-induced wear. Heat-resistant and corrosion-resistant materials maintain blade integrity and motor output over long duty cycles, so airflow remains consistent when the load does not let up.
Highlights
- High airflow of 800 CFM keeps engines cool
- 12 V 80 W motor delivers strong performance at 2900 RPM
- Slim 2.64 in profile fits tight engine bays
- Reversible puller or pusher design adapts to any setup
- Complete mounting kit with 10 blades enables fast installation
Specifications
| Brand | GESEXI |
|---|---|
| Part Number | MK0253 |
Questions about this item
What limits continuous running on the 12 V 80 W motor?
The motor is rated at 80 W and 2900 ±10 % RPM; sustained load beyond that thermal envelope will trigger internal protection.
How much heat and noise does the 10-blade 7" fan produce at 2900 RPM?
At 2900 RPM the fan moves 800 CFM through a 2.64" thick housing; expect noticeable airflow noise and measurable heat rejection into the engine bay.
Which mounting hardware must already be on the vehicle for the included kit to work?
The kit supplies rods, clips, foam pads, feet and springs; you need existing 8 mm threaded holes or a fan shroud with matching bolt pattern to accept them.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
