Gedore
Gedore 8571 Torque Wrench 520-1000 Nm 380-730 lbf-ft
Micrometer torque wrench covering 520–1000 Nm and 380–730 lbf-ft with 3/4 in drive and 10 Nm increments
- ColorTransparent
- Precise tightening from 520 to 1000 Nm
- Dual scale reads 380 to 730 lbf-ft
- 3/4 inch drive fits heavy-duty fasteners
- 10 Nm and 10 ft-lb steps for fine adjustment
- Clockwise ratchet with tether point for safety
Torque Range 520-1000 Nm
This Gedore micrometer torque wrench covers 520 to 1000 Nm and 380 to 730 lbf-ft. It uses a 3/4 in drive and adjusts in 10 Nm or 10 ft-lb increments. The ratcheting mechanism operates clockwise only. The tool is supplied new and includes tether capability.
Suited For Heavy Industrial Fastening
Mechanics tightening large structural bolts on heavy plant, crane assemblies or marine engines will find the range appropriate. It is not suited for lighter automotive work such as cylinder-head or suspension bolts that require lower torque values. Workshops needing bi-directional ratcheting or finer resolution should consider other tools.
Capacity And Headroom
The wrench comfortably handles fasteners specified between 520 Nm and 1000 Nm with 10 Nm step adjustments. It runs out of range below 520 Nm, so smaller critical joints cannot be addressed. The clockwise-only ratchet limits use on left-hand threads or reverse-torque verification.
Highlights
- Precise tightening from 520 to 1000 Nm
- Dual scale reads 380 to 730 lbf-ft
- 3/4 inch drive fits heavy-duty fasteners
- 10 Nm and 10 ft-lb steps for fine adjustment
- Clockwise ratchet with tether point for safety
Specifications
| Brand | GEDORE |
|---|---|
| Color | Transparent |
Questions about this item
What drive size socket do I need to fit the 3/4 in drive on this 8571 wrench?
Use sockets with a 3/4 in square drive to match the wrench's 3/4 in drive size.
Can I still use my existing 3/4 in drive sockets with the 8571 torque wrench?
Yes, any standard 3/4 in drive socket will engage the wrench's 3/4 in square drive.
How do I verify the 8571 is clicking at the set torque after adjustment?
Turn the handle until the micrometer scale shows the desired value between 520 and 1000 N-m, then apply force clockwise until the ratchet mechanism clicks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
