GE
GE THQC1130WL Miniature Circuit Breaker 30A 1 Pole 120/240V AC
A 30 A single-pole miniature breaker rated 120/240 V AC with a 10 kA interrupting capacity for GE panelboards
- Reliable 10 kA interrupting capacity protects circuits
- 30 A single-pole rating handles standard branch loads
- 120/240 V AC dual-voltage fits common panels
- Lug terminals accept 14 to 8 AWG wire securely
- Compact 3.3 × 1 × 2.4 in design saves panel space
GE THQC 30 A Single-Pole Breaker
The GE THQC1130WL is a miniature circuit breaker rated at 30 A for 120/240 V AC single-phase systems. It mounts on a surface or DIN rail and fits GE panelboards using a standard lug terminal. The toggle actuator provides manual switching and the frame size matches the 100 A THQ format.
Panel-builders needing 30 A branch protection
Electricians wiring GE load centres will find the correct pole count and voltage rating in this unit. Installers who require a DC rating, multi-pole configuration or a higher interrupting capacity than 10 kA should select a different breaker. The 14 to 8 AWG wire range also limits use with larger conductors.
10 kA interrupting rating at 120/240 V AC
This breaker carries a maximum AIR rating of 10 kA at its rated voltage. That figure determines whether the device can safely clear a fault in your panel. Verify the available fault current before installation to ensure the breaker is adequate for the circuit.
Highlights
- Reliable 10 kA interrupting capacity protects circuits
- 30 A single-pole rating handles standard branch loads
- 120/240 V AC dual-voltage fits common panels
- Lug terminals accept 14 to 8 AWG wire securely
- Compact 3.3 × 1 × 2.4 in design saves panel space
Specifications
| Brand | GE |
|---|
Questions about this item
Does the breaker come with the lug terminals already attached or do I need to buy them separately?
The lug terminals are included with the breaker so no separate purchase is required.
How do I know whether the 30 A single-pole version is the right choice for my panel?
Choose this 30 A single-pole model when protecting a 120/240 V AC circuit that fits a GE THQC series panelboard and requires a 10 kA interrupting rating.
What does the 10 kA AIR rating mean when the breaker is installed in my panel?
It means the breaker can safely interrupt up to 10 000 amps of fault current at 120/240 V AC without damage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
