GCROWN
GCROWN Dual Monitor KVM Switch 2 Ports HDMI 2.1 DP 1.4 8K 60Hz 4K 120Hz USB 3.0
A two-port KVM switch lets two computers share dual monitors at up to 8K 60Hz or 4K 120Hz plus four USB 3.0 peripherals
- TypeKVM Switch
- Share two PCs across dual monitors
- Supports 8K at 60 Hz and 4K at 120 Hz
- Backward compatible with 4K 60 Hz, 1080p and 720p
- Four USB 3.0 ports deliver 5 Gbps data speed
- Extended and copy display modes supported
Dual-Monitor KVM Switch
The GCROWN dual-monitor KVM switch lets two computers or laptops share two HD monitors and four USB 3.0 ports for mouse, keyboard, printer, flash drive or gamepad. It supports extended and copy display modes when the connected computers provide dual-monitor output and the monitors have both DP and HDMI interfaces. A wired extended controller is included for convenient switching.
Desk setups with two PCs and two screens
This switch suits users who need to control two systems from one keyboard, mouse and dual-monitor array without unplugging cables. It is not for setups that require more than two video sources or more than four USB peripherals. Buyers whose monitors lack both DP and HDMI inputs will need separate signal converters, and single-monitor users gain no benefit from the second video channel.
8K 60Hz and 4K 120Hz headroom
The HDMI 2.1 and DP 1.4 interfaces deliver up to 8K at 60 Hz and 4K at 120 Hz, with backward compatibility down to 1080P and 720P. Mixed-resolution sources are handled simultaneously and the switch auto-detects each signal when changing inputs. USB 3.0 ports run at 5 Gbps, ten times the 2.0 rate, so external drives transfer quickly. Bandwidth limits appear only beyond the stated 8K 60Hz and 4K 120Hz ceilings.
Highlights
- Share two PCs across dual monitors
- Supports 8K at 60 Hz and 4K at 120 Hz
- Backward compatible with 4K 60 Hz, 1080p and 720p
- Four USB 3.0 ports deliver 5 Gbps data speed
- Extended and copy display modes supported
Specifications
| Type | KVM Switch |
|---|
Questions about this item
What cables must I already have to connect both monitors and both computers to this KVM switch?
You need two HDMI 2.1 cables and two DisplayPort 1.4 cables for the monitors, plus two HDMI 2.1 and two DisplayPort 1.4 cables for the computers, matching the HDMI 2.1 and DP 1.4 ports on the switch.
Will my existing 1080P and 720P monitors work with this switch alongside a newer 4K display?
Yes, the switch is backward compatible with 1080P and 720P resolutions and can handle two sources at different resolutions simultaneously.
How can I verify the switch is delivering 4K at 120Hz after I set it up?
Check the on-screen display or graphics control panel on the active computer; it should report 4K at 120Hz when the source and monitor both support that mode.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



