Gates
Gates XPA1757 Metric V-Belt 1757 mm Outside Length
Metric V-belt with 1757 mm outside length, 13 mm top width and 10 mm thickness, operating from -30 to 140 °F
- MaterialHAWA
- Precise fit for XPA pulleys with 1757 mm outside length
- Reliable power transfer via polyester tensile cords
- Cogged raw-edge design reduces bending stress
- Withstands -30 °F to 140 °F operating temperatures
- Resists heat, oil, ozone and flame for durability
Gates XPA1757 Metric V-Belt
The Gates XPA1757 is a metric V-belt designed for industrial lifting, pulling and conveying applications. It suits maintenance engineers and equipment operators who need a direct replacement belt with a 1757 mm outside length. The single-rib XPA section fits standard metric pulleys used on conveyors, fans and agricultural drives.
Cogged Raw-Edge Construction
A cogged, raw-edge profile increases flexibility and reduces bending stress on small pulleys. The HAWA compound uses fiber-loaded elastomer with polyester tensile cords to resist heat, oil, ozone and flame. It operates reliably from -30 to 140 degrees Fahrenheit. The 13 mm top width and 10 mm thickness match the XPA dimensional standard for secure groove engagement.
Upgrade From Wrapped Belts
This belt replaces worn wrapped V-belts that crack or glaze under high temperatures or oil exposure. The cogged design runs cooler and transmits more power on the same pulley centres. The jump is worth it when existing belts slip, stretch or fail prematurely in harsh environments. It is not for drives requiring multi-rib or synchronous tooth profiles.
Highlights
- Precise fit for XPA pulleys with 1757 mm outside length
- Reliable power transfer via polyester tensile cords
- Cogged raw-edge design reduces bending stress
- Withstands -30 °F to 140 °F operating temperatures
- Resists heat, oil, ozone and flame for durability
Specifications
| Brand | GATES |
|---|---|
| Material | HAWA |
Questions about this item
What does the XPA section mean for pulley fit?
XPA is the metric V-belt section; the belt has a 13 mm top width and 10 mm thickness to match XPA pulley grooves.
What are the exact outside length and cross-section dimensions?
Outside length is 1757 mm, top width 13 mm, thickness 10 mm, single-rib cogged raw-edge construction.
How do I install this raw-edge cogged belt correctly?
Fit the belt onto the pulleys without forcing, then tension to the drive manufacturer's specification; the common error is over-tensioning the polyester tensile cords.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
