Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00995436BTC
In stock
FYIOGXG Replacement Battery 400mAh 3.7V for ET-300-L ET-302 ET-402Receiver
400 mAh 3.7 V lithium-polymer replacement cell fits ET-300-L, ET-302 and ET-402 receivers and transmitters
- Specifications29.10 x 22.10 x 8.10
- Typelithium_polymer
- Battery Pack29.10 x 22.10 x 8.10
- Battery Typelithium_polymer
- Battery Capacity400.00 milliamp_hours
- Battery Voltage3.70 volts
- 400 mAh capacity powers compatible dog-collar units
- 7 V lithium-polymer cell matches original voltage
- 10 × 22.10 × 8.10 mm size fits ET-300-L, ET-302, ET-402 receivers
- ISO 9001, RoHS and CE certified for safety compliance
- 8 g lightweight pack with overcharge, over-discharge and short-circuit protection
Compatible Replacement Battery
This 400mAh 3.7V lithium polymer cell replaces the original power source for ET-300-L, ET-302 and ET-402 receiver or transmitter units. It matches the factory dimensions of 29.10 x 22.10 x 8.10mm and weighs 8.8g. The integrated protection circuit guards against overcharge, over-discharge, over-voltage and short circuits. It suits owners of compatible dog training collars needing a direct swap.
Sustained Operation
The 1.48Wh capacity supports typical training sessions between charges. A fresh cell reaches its best runtime after two or three full charge and discharge cycles. Protection circuitry maintains stable output during continuous use and prevents damage from deep discharge. Avoid low-quality third-party chargers, which can reduce overall service life.
Upgrade Considerations
This part replaces batteries identified by part numbers PL-762229 or V2015-E05. The jump is worth it when the original cell no longer holds sufficient charge or shows swelling. It is not for devices outside the listed ET model range or for applications requiring a different voltage or connector layout. Do not disassemble, expose to fire or water, or store above 60°C.
Highlights
- 400 mAh capacity powers compatible dog-collar units
- 7 V lithium-polymer cell matches original voltage
- 10 × 22.10 × 8.10 mm size fits ET-300-L, ET-302, ET-402 receivers
- ISO 9001, RoHS and CE certified for safety compliance
- 8 g lightweight pack with overcharge, over-discharge and short-circuit protection
Specifications
| Brand | FYIOGXG |
|---|---|
| Model | Replacement battery |
| Specifications | 29.10 x 22.10 x 8.10 |
| Type | lithium_polymer |
| Battery Pack | 29.10 x 22.10 x 8.10 |
| Battery Type | lithium_polymer |
| Battery Capacity | 400.00 milliamp_hours |
| Battery Voltage | 3.70 volts |
Questions about this item
How much heat does the 3.7 V 400 mAh lithium-polymer cell generate during all-day use in a dog collar?
The 400 mAh 3.7 V lithium-polymer cell weighs 8.8 g and is rated at 1.48 Wh, so normal collar operation produces only mild warmth well within the 60 °C storage limit.
What connector or charger must I already own to install and charge this battery?
The replacement uses the original device connector; you need the factory charger that came with the ET-300-L, ET-302 or ET-402 receiver — avoid low-quality third-party adapters.
Will this 29.10 × 22.10 × 8.10 mm pack fit my older ET-300-L transmitter without modification?
Yes, the pack matches the original dimensions and part numbers PL-762229 and V2015-E05, so it slides into the ET-300-L, ET-302 and ET-402 housings directly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
