Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.01001024BTC
In stock
FYIOGXG Concept VP4135 VP4201 5-pin 4000mAh 3.7V 14.8Wh standard battery
Replacement lithium-polymer battery for Babysense BBM01, BBM03, Bonoch BBM05 and HD S2 video baby monitors, 4000 mAh 3.7 V 14.8 Wh
- Specifications61.60 x 54.70 x 8.70mm
- Typelithium_polymer
- Battery Pack61.60 x 54.70 x 8.70mm
- Battery Typelithium_polymer
- Battery Capacity4000.00 milliamp_hours
- Battery Voltage3.70 volts
- 4000 mAh capacity powers baby monitors for extended use
- 7 V lithium-polymer chemistry matches original battery specs
- 5-pin connector fits Babysense BBM01, BBM03 and Bonoch BBM05 models
- 6 x 54.7 x 8.7 mm form factor slides into existing battery compartment
- ISO 9001 certified production with overcharge and short-circuit protection
Compatible replacement battery
This lithium-polymer pack replaces the original power source in Babysense BBM01, BBM03, Bonoch BBM05 and HD S2 Video Baby Monitor units. It matches the factory specifications of 4000mAh capacity and 3.7V voltage. The 5-pin connector aligns with the original design for direct fitment. A fully decoded chip ensures the monitor recognises the cell immediately.
Upgrade from depleted original cells
The jump is worth it when the monitor no longer holds a charge through a full night or shuts down during nap checks. Swapping the worn cell restores the original runtime without modifying the device. The new pack arrives ready for the recommended two to three charge cycles to reach peak capacity. Installation videos are widely available for guidance.
Fits inside the existing battery compartment
The 61.60 x 54.70 x 8.70mm footprint slides into the same cavity as the factory unit. No case modifications or adapter cables are required. Built-in protection guards against overcharge, over-discharge, over-voltage and short circuits. Shock-absorbing foam in the packaging protects the cell during transit.
Highlights
- 4000 mAh capacity powers baby monitors for extended use
- 7 V lithium-polymer chemistry matches original battery specs
- 5-pin connector fits Babysense BBM01, BBM03 and Bonoch BBM05 models
- 6 x 54.7 x 8.7 mm form factor slides into existing battery compartment
- ISO 9001 certified production with overcharge and short-circuit protection
Specifications
| Brand | FYIOGXG |
|---|---|
| Model | Concept VP4135 (5 pin) VP4201 (5 pin) |
| Part Number | Concept 42393246 ZL-8260S0520 |
| Specifications | 61.60 x 54.70 x 8.70mm |
| Type | lithium_polymer |
| Battery Pack | 61.60 x 54.70 x 8.70mm |
| Battery Type | lithium_polymer |
| Battery Capacity | 4000.00 milliamp_hours |
| Battery Voltage | 3.70 volts |
Questions about this item
What are the exact dimensions of this 61.60 x 54.70 x 8.70mm battery pack?
The lithium-polymer pack measures 61.60mm long, 54.70mm wide and 8.70mm thick, matching the original battery footprint for Babysense BBM01, BBM03, Bonoch BBM05 and HD S2 monitors.
How do I install the 5-pin connector correctly on the first try?
Align the 5-pin plug with the monitor socket, press straight in until it clicks, then secure the battery in the compartment; the most common error is inserting the connector at an angle, which bends pins and prevents charging.
After how many charge cycles does the 4000mAh capacity stabilise?
The manufacturer states the new cell reaches its best performance after 2 or 3 complete charge-discharge cycles, so run it from full to empty and back two or three times before relying on full runtime.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
