FYIOGXG Battery for Shark Ion W1 Cord WV200 WV200UK WV201 WV205 WV220 XFBT200 XFBT200EU 2000mAh 21.60Wh
Replacement lithium-ion battery for Shark Ion W1 Cord and WV series vacuums, 2000 mAh at 10.8 V
- Typelithium_ion
- Pack143.12 x 45.50 x 38.40
- Chemicallithium_ion
- Capacity2000 milliamp_hours
- CompatibilityXFBT200 XFBT200EU
- FeaturesBattery
- Runs Shark Ion W1 Cord and WV models
- 2000 mAh capacity powers longer cleaning sessions
- 8 V lithium-ion chemistry matches original spec
- 12 x 45.50 x 38.40 mm fits battery bay
- Built-in protection guards against overcharge and short circuit
Replacement battery for Shark Ion W1 Cord
This lithium-ion battery replaces the original Shark XFBT200 and XFBT200EU packs used in Ion W1 Cord, WV200, WV200UK, WV201, WV205 and WV220 vacuum cleaners. It delivers 2000mAh capacity at 10.8 volts for 21.60Wh of energy. The pack measures 143.12 x 45.50 x 38.40mm and weighs 181.8g. A decoded chip ensures full communication with the vacuum.
Suits owners needing a direct swap for a worn
Buyers who want more runtime than the original 2000mAh rating should look at higher-capacity alternatives if they exist for this model. The battery is built to the same physical specification as the OEM unit so it fits the existing battery bay without modification. It is not intended for use in other vacuum brands or non-Shark devices.
Fits into the vacuum's existing battery compartment
No extra chargers or adapters are required because the pack works with the vacuum's original charging dock. The decoded chip allows the vacuum's firmware to read charge state accurately. Built-in protection guards against overcharge, over-discharge, over-voltage and short circuits. The package includes shock-absorbing foam for transit protection.
Highlights
- Runs Shark Ion W1 Cord and WV models
- 2000 mAh capacity powers longer cleaning sessions
- 8 V lithium-ion chemistry matches original spec
- 12 x 45.50 x 38.40 mm fits battery bay
- Built-in protection guards against overcharge and short circuit
Specifications
| Brand | FYIOGXG |
|---|---|
| Model | Battery For Shark |
| Type | lithium_ion |
| Pack | 143.12 x 45.50 x 38.40 |
| Chemical | lithium_ion |
| Capacity | 2000 milliamp_hours |
| Compatibility | XFBT200 XFBT200EU |
| Features | Battery |
Questions about this item
Which Shark vacuum models accept the 10.8 V, 2000 mAh battery with part numbers XFBT200 or XFBT200EU?
This battery fits Shark Ion W1 Cord, WV200, WV200UK, WV201, WV205 and WV220 vacuums that use the original XFBT200 or XFBT200EU pack.
Will the 143.12 × 45.50 × 38.40 mm lithium-ion pack fit the same battery bay as the original Shark battery in my WV200?
Yes, the replacement matches the original dimensions and connector, so it seats in the existing bay without modification.
How can I confirm the new battery is working correctly after the first few charge cycles?
After two or three full charge and discharge cycles the vacuum should run for the expected time and the battery indicator will show normal charge levels.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



