We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack with connector, grey finish

FYIOGXG 5200mAh 19.24Wh 3.7V Battery for Falcon X3 X3+ X4

SKU CH-5AF2-705DQ

Replacement lithium-ion cell rated 5200 mAh and 19.24 Wh at 3.7 V fits Falcon X3, X3+, X3 Plus and X4 barcode scanners

  • Typeaaa
  • 5200mAh capacity powers long scanning shifts
  • 24Wh energy rating matches original spec
  • Fits Falcon X3, X3+, X3 Plus and X4
  • ISO9001, RoHS and CE certified
  • Built-in protection against overcharge and short circuit

Battery for Falcon X3 X3+ X4

This 5200mAh 19.24Wh lithium-ion cell replaces the original power pack in Falcon X3, X3 Plus, X3+ and X4 barcode scanners. It ships new with a fully decoded chip that communicates with the handset exactly like the factory unit. The 3.7V output matches the device specification so no firmware change is needed.

Capacity 5200mAh 19.24Wh

The single figure that decides fit is the 5200mAh / 19.24Wh rating at 3.7V. If your original battery shows a different capacity or voltage this pack will not sit correctly in the compartment or report charge level accurately. Verify the part number 94ACC1386 or BT-26 on the old cell before ordering.

Shock-foam packaging

The box includes shock-absorbing foam that protects the cell during transit and prevents connector damage before installation. No tools, cables or software discs are bundled; the battery simply drops into the scanner bay and locks with the existing latch.

Highlights

  • 5200mAh capacity powers long scanning shifts
  • 24Wh energy rating matches original spec
  • Fits Falcon X3, X3+, X3 Plus and X4
  • ISO9001, RoHS and CE certified
  • Built-in protection against overcharge and short circuit

Specifications

BrandFYIOGXG
Typeaaa

Questions about this item

How long will the 5200 mAh capacity actually run my Falcon X4 scanner?

Runtime depends on the scanner's power draw; the 19.24 Wh rating lets you compare it with the original battery's watt-hour figure to estimate operating time.

Does the 3.7 V nominal voltage match the original BT-26 pack?

Yes, the replacement is rated at 3.7 V, the same nominal voltage as the original Falcon X3/X4 battery, so it connects directly to the scanner's power rail.

Will the 79.00 x 41.16 x 24.55 mm case fit inside my Falcon X3+ battery compartment?

Those are the exact external dimensions of the pack; verify them against your device's battery cavity before ordering to ensure a proper fit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.