FYIOGXG 1200mAh 7.5V NiZn battery for FuG11B SE110 SE140
Nickel-zinc replacement battery delivering 1200mAh at 7.5V for FuG11B, SE110 and SE140 two-way radios
- Specifications1
- Typenickel_zinc
- Battery Pack1
- Battery Typenickel_zinc
- Battery Capacity1200.00 milliamp_hours
- Battery Voltage7.50 volts
- Compatible with FuG11B, SE110 and SE140 radios
- 1200 mAh capacity delivers 9.00 Wh of energy
- Nickel-zinc chemistry at 7.5 V matches original spec
- Built-in protection against overcharge, over-discharge and short circuit
- ISO9001, RoHS and CE certified for quality assurance
Replacement Battery for FuG11B SE110 SE140
This nickel-zinc battery replaces the original CPA141 and CPA2800 packs used in FuG11B, SE110 and SE140 radios. It delivers 1200mAh at 7.5V for a total of 9.00Wh of energy. The pack is sold new and carries ISO9001, RoHS and CE certifications.
Fits Directly Into Compatible Handsets
The unit matches the exact specifications of the original battery so it slots into the radio without adapters or wiring changes. A fully decoded chip communicates with the host device exactly like the factory pack. No extra chargers or mounting hardware are required.
Sustained Output With Built-In Protection
Overcharge, over-discharge, over-voltage and short-circuit protection circuits guard the cells during long transmit cycles. The chemistry maintains stable voltage under continuous load rather than sagging after a short burst. A new pack reaches its best capacity after two or three full charge and discharge cycles.
Highlights
- Compatible with FuG11B, SE110 and SE140 radios
- 1200 mAh capacity delivers 9.00 Wh of energy
- Nickel-zinc chemistry at 7.5 V matches original spec
- Built-in protection against overcharge, over-discharge and short circuit
- ISO9001, RoHS and CE certified for quality assurance
Specifications
| Brand | FYIOGXG |
|---|---|
| Model | Replacement battery |
| Specifications | 1 |
| Type | nickel_zinc |
| Battery Pack | 1 |
| Battery Type | nickel_zinc |
| Battery Capacity | 1200.00 milliamp_hours |
| Battery Voltage | 7.50 volts |
Questions about this item
How long does the 1200mAh capacity last during continuous transmit on a FuG11B?
The 1200mAh nickel-zinc pack delivers 9.00Wh at 7.5V; actual run-time depends on the radio's transmit duty cycle and power setting.
Does the battery get hot or draw extra power when the SE140 runs all day?
Normal operation stays within the cell's rated voltage; the built-in protection circuit guards against over-voltage and short-circuit during extended use.
Which original part numbers must match for this replacement to fit my radio?
Confirm your existing battery shows CPA141 or CPA2800 before ordering; the pack is built to those exact specifications.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



