Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.0098938BTC
In stock
FYIOGXG 1200mAh 10.8V Nickel-Zinc Battery for Brady BMP41 BMP61 41-BP
Replacement nickel-zinc battery delivers 1200 mAh at 10.8 V for Brady BMP41 and BMP61 label printers
- Specifications109.50 x 56.90 x 24.90
- Typenickel_zinc
- Battery Pack109.50 x 56.90 x 24.90
- Battery Typenickel_zinc
- Battery Capacity1200.00 milliamp_hours
- Battery Voltage10.80 volts
- 1200 mAh capacity powers Brady BMP41 and BMP61 printers longer
- 8 V nickel-zinc chemistry matches original 41-BP specifications
- ISO9001, RoHS and CE certifications confirm manufacturing quality
- 50 × 56.90 × 24.90 mm form factor fits printer battery bay exactly
- Built-in overcharge, over-discharge, over-voltage and short-circuit protection safeguards cells
Replacement Battery for Brady BMP41 BMP61
This 1200mAh nickel-zinc pack replaces the Brady 41-BP cell used in BMP41 and BMP61 portable label printers. It delivers 10.8 volts and 12.96 watt-hours in a 109.50 x 56.90 x 24.90 mm form factor weighing 224.6 g. The fully decoded chip communicates with the printer exactly like the original battery. Installers can follow widely available online videos for a straightforward swap.
Voltage and Chemistry Match
The single specification that decides fit is the 10.80 volt nickel-zinc chemistry paired with the 1200.00 milliamp-hour capacity. Only a pack with this exact voltage and cell type will power the printer correctly and report charge status through the decoded chip. A different voltage or chemistry would prevent the device from operating or cause inaccurate readings.
Sustained Print Duty
Under continuous label printing the nickel-zinc cells maintain a stable 10.8 volt output without the voltage sag common in high-drain bursts. The integrated protection circuit guards against over-charge, over-discharge, over-voltage and short-circuit during long shifts. After two or three full charge-discharge cycles the pack reaches its rated 12.96 Wh capacity for consistent day-long operation.
Highlights
- 1200 mAh capacity powers Brady BMP41 and BMP61 printers longer
- 8 V nickel-zinc chemistry matches original 41-BP specifications
- ISO9001, RoHS and CE certifications confirm manufacturing quality
- 50 × 56.90 × 24.90 mm form factor fits printer battery bay exactly
- Built-in overcharge, over-discharge, over-voltage and short-circuit protection safeguards cells
Specifications
| Brand | FYIOGXG |
|---|---|
| Model | Replacement battery |
| Specifications | 109.50 x 56.90 x 24.90 |
| Type | nickel_zinc |
| Battery Pack | 109.50 x 56.90 x 24.90 |
| Battery Type | nickel_zinc |
| Battery Capacity | 1200.00 milliamp_hours |
| Battery Voltage | 10.80 volts |
Questions about this item
How long will the 1200 mAh capacity actually run my BMP41 or BMP61 printer?
Capacity is 1200 mAh at 10.8 V, giving 12.96 Wh; real run-time depends on how much the printer draws while printing or idling.
Does the 10.8 V nickel-zinc chemistry need a special charger or will the printer’s built-in charging handle it?
The pack includes a decoded chip that works like the original, so the printer’s standard charging circuit manages it without an external charger.
Will the 109.5 × 56.9 × 24.9 mm pack fit the battery bay on my BMP41 or BMP61?
Those are the exact dimensions of the original 41-BP pack, so it slides into the same compartment and latches normally.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
