Cable Techniques
Cable Techniques Smart Battery Adapter Cap to Hirose 4-Pin 24
$52.99
0.00063498BTC
In stock
Fuji Labs
Fuji Labs AUFJ-SQWMS101RE Sonique SQ101 In-Ear Headphones Red
Red in-ear headphones with a 10 mm driver, 3.5 mm connector, in-line microphone and 4.5 ft cord
- TypeIn-Ear
- ColorRed
- Driver Unit10mm
- Frequency Response20Hz–20KHz
- Input Impedance16 ohms
- Power SupplyMax.Input Power: 10 mW
- Clear calls with sensitive in-line microphone at -38 dB +/- 3dB
- Comfortable fit from three pairs of single flange ear-tips included
- Wide frequency range 20Hz–20KHz for full audio spectrum
- Durable high-strength alloy shell with brush effect finish
- Tangle-resistant 4.5ft cord with 3.5mm connector for easy connection
Red in-ear headphones for everyday listeners
The Fuji Labs Sonique SQ101 uses a 10mm driver and a 3.5mm connector to deliver stereo sound from phones, tablets or laptops. A 10mW input limit and 16 ohm impedance keep volume safe for long sessions. The red alloy shell adds a distinctive look while the 4.5ft cord reaches a pocket without strain.
Sustained listening with alloy shell and battery
The high-strength alloy shell with brush effect resists heat build-up during extended play so the 10mm driver stays stable. A high-capacity polymer battery supports long working time between charges and the 95dB sensitivity maintains consistent output at the 10mW ceiling. The 2.0 sound track preserves fidelity across the 20Hz–20KHz range without compression artefacts.
Simple plug-in fit with three tip sizes
Three pairs of single flange ear-tips let most ears find a seal quickly; the downward-facing hollow diaphragm aligns naturally with the canal. In-line buttons handle playback and calls while the -38dB microphone picks up voice clearly. Users who need active noise cancellation or a detachable cable will find those features absent.
Highlights
- Clear calls with sensitive in-line microphone at -38 dB +/- 3dB
- Comfortable fit from three pairs of single flange ear-tips included
- Wide frequency range 20Hz–20KHz for full audio spectrum
- Durable high-strength alloy shell with brush effect finish
- Tangle-resistant 4.5ft cord with 3.5mm connector for easy connection
Specifications
| Brand | Fuji Labs |
|---|---|
| Series | Sonique SQ101 |
| Model | AUFJ-SQWMS101RE |
| Type | In-Ear |
| Color | Red |
| Driver Unit | 10mm |
| Frequency Response | 20Hz–20KHz |
| Input Impedance | 16 ohms |
| Power Supply | Max.Input Power: 10 mW |
| Sensitivity | 95 dB +/- 3dB |
| Connector | 3.5mm |
| Cord Length | 4.5ft |
| Microphone Sensitivity | -38 dB +/- 3dB |
| Features | 10W powerful sound High-strength alloy shell with brush effect High-capacity polymer battery for long working time 2.0 sound track for high acoustic fidelity Bluetooth module for smooth sound transmission Special hollow diaphragm facing downward Multimedia Extension via buttons |
| Package Contents | Included Accessories: 3 pairs of single flange ear-tips |
| Shipping weight | 0.05 kg |
| Package size | 196 × 71 × 28 mm |
Questions about this item
How much power do the 10mm drivers draw during all-day listening?
The 10mm drivers are rated for a maximum input power of 10 mW and 16 ohms impedance, keeping power draw very low for extended sessions.
What source connector must my device provide for these headphones to work?
A standard 3.5mm headphone jack is required; the 4.5ft cable ends in a 3.5mm plug.
Will the in-line microphone and controls function with an older 3.5mm-only laptop?
Yes, the 3.5mm connector carries both stereo audio and the microphone signal with -38 dB sensitivity, so the mic and multimedia buttons work on legacy ports.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HQRP
HQRP 2-Pack 10 ft 2.1mm x 5.5mm DC Power Extension Cable + Coaster
- Black
$4.99
0.0000598BTC
In stock