Cable Techniques
Cable Techniques Smart Battery Adapter Cap to Hirose 4-Pin 24
$52.99
0.00063843BTC
In stock
Fuji Labs
Fuji Labs AUFJ-SQWMS101GR In-Ear Headphones Green
Green in-ear headphones with a 10 mm driver, 3.5 mm connector, in-line microphone and 4.5 ft cord
- TypeIn-Ear
- ColorGreen
- Driver Unit10mm
- Frequency Response20Hz–20KHz
- Input Impedance16 ohms
- Power SupplyMax.Input Power: 10 mW
- 10 mm driver delivers full-range audio from 20 Hz to 20 kHz
- 95 dB sensitivity produces loud, clear sound at low power
- 16 ohm impedance matches smartphones and laptops directly
- 5 mm plug with 4.5 ft cable reaches devices comfortably
- In-line microphone at -38 dB captures voice for calls
Green in-ear headphones for daily listening
The Fuji Labs Sonique SQ101 is a wired in-ear headphone finished in green. A 10 mm driver delivers a frequency response of 20 Hz to 20 KHz at 16 ohms impedance and 95 dB sensitivity. Maximum input power is rated at 10 mW. An in-line microphone with -38 dB sensitivity handles calls and voice commands.
Alloy shell and 3.5 mm plug for simple connectivity
A high-strength alloy shell with a brushed effect protects the internals while keeping weight low. The fixed 3.5 mm connector plugs directly into phones, laptops or portable players without adapters. A 4.5 ft cable provides enough reach for pocket or desk use without excess slack. Buttons on the cable allow playback control and call management.
Three ear-tip pairs for a better seal
The package includes three pairs of single-flange ear-tips so users can choose the fit that seals best in their ears. A proper seal improves bass response and reduces outside noise during commutes or work sessions. No additional accessories or software are bundled with the headphones.
Highlights
- 10 mm driver delivers full-range audio from 20 Hz to 20 kHz
- 95 dB sensitivity produces loud, clear sound at low power
- 16 ohm impedance matches smartphones and laptops directly
- 5 mm plug with 4.5 ft cable reaches devices comfortably
- In-line microphone at -38 dB captures voice for calls
Specifications
| Brand | Fuji Labs |
|---|---|
| Model | AUFJ-SQWMS101GR |
| Type | In-Ear |
| Color | Green |
| Driver Unit | 10mm |
| Frequency Response | 20Hz–20KHz |
| Input Impedance | 16 ohms |
| Power Supply | Max.Input Power: 10 mW |
| Sensitivity | 95 dB +/- 3dB |
| Connector | 3.5mm |
| Cord Length | 4.5ft |
| Microphone Sensitivity | -38 dB +/- 3dB |
| Features | 10W powerful sound High-strength alloy shell with brush effect High-capacity polymer battery for long working time 2.0 sound track for high acoustic fidelity Bluetooth module for smooth sound transmission Special hollow diaphragm facing downward Multimedia Extension via buttons |
| Package Contents | Included Accessories: 3 pairs of single flange ear-tips |
| Shipping weight | 0.05 kg |
| Package size | 196 × 71 × 28 mm |
Questions about this item
What does the 3.5mm connector limit in practice?
The 3.5mm connector carries analog stereo audio and the inline microphone signal; it cannot deliver digital audio or remote-control data beyond basic multimedia buttons.
What physical clearance does the alloy shell need to fit in the ear?
The high-strength alloy shell with brush effect is an in-ear design that sits inside the ear canal; three pairs of single-flange ear-tips are included to match different canal sizes.
How are the headphones installed, and which step is often missed?
Plug the 3.5mm jack fully into the source device, select the ear-tip size that seals your canal, and insert each earpiece with the special hollow diaphragm facing downward for correct orientation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HQRP
HQRP 2-Pack 10 ft 2.1mm x 5.5mm DC Power Extension Cable + Coaster
- Black
$4.99
0.00006012BTC
In stock