We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver brushed aluminium in-ear buds with flat cable and inline mic

Fuji Labs

Fuji Labs AUFJ-PSQWBS306MG SQ306 10mm In-Ear Headphones

SKU CH-5HWN-XHRMC MPN AUFJ-PSQWBS306MG

In-ear headphones with a 10mm driver, 20Hz–20KHz response, built-in mic and flat tangle-resistant cables

  • TypeIn-Ear
  • Driver Unit10mm
  • Frequency Response20Hz–20KHz
  • Input Impedance16 ohms
  • Power SupplyMax.Input Power: 10 mW
  • Sensitivity110 dB +/- 3dB
  • Dynamic sound stage from 10mm driver unit
  • Clear vocals and full treble at 110 dB sensitivity
  • Fast sound response via special hollow diaphragm
  • Flat tangle-resistant cables measuring 4.5 ft
  • Built-in mic with -38 dB sensitivity and multimedia buttons

Fuji Labs SQ306 10mm In-Ear Headphones

The Fuji Labs SQ306 is a wired in-ear headphone built around a 10mm driver unit. It connects through a 3.5mm plug and presents a 16 ohm load with 110 dB sensitivity. The frequency response spans 20Hz to 20KHz. Maximum input power is rated at 10 mW.

Built-in microphone and flat cable

An inline microphone with -38 dB sensitivity handles calls and voice commands. The flat, tangle-resistant cord runs 4.5 ft and includes multimedia control buttons. A high-strength aluminum alloy shell with a brushed finish houses the driver. A special hollow diaphragm faces downward to shape the acoustic output.

Simple 3.5mm connection

Plug the 3.5mm connector into any compatible jack for immediate audio; no drivers or software are required. The low 16 ohm impedance works well with portable devices. The 10 mW power limit means very high volumes from powerful sources could overdrive the unit. The 4.5 ft cable may feel short for desktop use.

Highlights

  • Dynamic sound stage from 10mm driver unit
  • Clear vocals and full treble at 110 dB sensitivity
  • Fast sound response via special hollow diaphragm
  • Flat tangle-resistant cables measuring 4.5 ft
  • Built-in mic with -38 dB sensitivity and multimedia buttons

Specifications

BrandFuji Labs
ModelAUFJ-PSQWBS306MG
TypeIn-Ear
Driver Unit10mm
Frequency Response20Hz–20KHz
Input Impedance16 ohms
Power SupplyMax.Input Power: 10 mW
Sensitivity110 dB +/- 3dB
Connector3.5mm
Cord Length4.5 ft.
Microphone Sensitivity-38 dB +/- 3dB
FeaturesHigh-strength aluminum alloy shell with brush effect
A very dynamic sound stage
Clear Vocal and Full Treble
Fast sound response
2.0 sound track for high acoustic fidelity
Flat tangle resistant cables
Special hollow diaphragm facing downward
Multimedia Extension via buttons
Shipping weight0.14 kg
Package size196 × 91 × 41 mm

Questions about this item

How long do the flat tangle-resistant cables on the SQ306 typically last before they need replacing?

The flat tangle-resistant cables on the SQ306 are designed for durability, but lifespan depends on usage habits; there is no fixed replacement interval for the 4.5 ft cable.

What is the maximum input power the 10mm driver can handle continuously without distortion?

The 10mm driver has a maximum input power rating of 10 mW; sustained use above this level may cause distortion or damage.

How warm does the aluminum alloy shell get during all-day listening sessions?

The high-strength aluminum alloy shell with brush effect dissipates heat well; it stays close to ambient temperature even during extended use because the 16 ohm impedance draws minimal power.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.