We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey nylon and mesh dual camera chest harness with buckles and hook-and-loop straps

FOMITO FMT-JD-F2 dual camera harness, 580 g capacity, 28 × 22.6 × 8 cm, grey

SKU CH-A7SH-WGAMC MPN FMT-JD-F2

Carries two DSLRs up to 580 g each on a nylon-and-mesh chest vest with 1/4" screw mounts and quick-release buckles

  • PartFMT-JD-SJ2*FMTUSA
  • Quantity1
  • ColorGrey Southwest
  • SizeJD-F2
  • SpecificationsNylon, Mesh Fabric, JD-F2, Grey, Buckle, Hook and Loop, 1.19
  • Eliminates neck and shoulder strain with dual harness design
  • Secure locking system with easy-release buckles for fast access
  • Holds two DSLRs up to 580 g total weight capacity
  • One size fits all with adjustable 1/4" screw mounts
  • Denier polypropylene and mesh fabric for lightweight durability

Dual Camera Harness for DSLR Users

The FOMITO FMT-JD-F2 is a grey chest vest system designed to carry two cameras simultaneously. It uses denier polypropylene and mesh fabric construction to distribute weight across the torso. The harness suits photographers working weddings, graduations, extreme sports, PR shoots or journalism assignments where quick access to multiple bodies is required.

Sustained Load Behaviour

Rated for a 580 g capacity per side, the harness eliminates neck and shoulder strain during extended sessions. The secure locking system keeps each camera steady while moving, preventing unwanted swinging. A 1/4-inch screw mount provides a standard connection point compatible with a wide range of DSLR models.

Setup Checks Before Ordering

Verify that each camera body with its attached lens falls within the 580 g weight limit and the 28 × 22.6 × 8 cm dimensional envelope. The vest uses a one-size-fits-all adjustable design secured by buckles and hook-and-loop fasteners. Buyers needing to carry heavier cinema rigs or more than two cameras should consider a different carrying solution.

Highlights

  • Eliminates neck and shoulder strain with dual harness design
  • Secure locking system with easy-release buckles for fast access
  • Holds two DSLRs up to 580 g total weight capacity
  • One size fits all with adjustable 1/4" screw mounts
  • Denier polypropylene and mesh fabric for lightweight durability

Specifications

BrandFOMITO
ModelFMT-JD-SJ2*ENUS
Part NumberFMT-JD-SJ2*FMTUSA
PartFMT-JD-SJ2*FMTUSA
Quantity1
ColorGrey Southwest
SizeJD-F2
SpecificationsNylon, Mesh Fabric, JD-F2, Grey, Buckle, Hook and Loop, 1.19 pounds, 7.2136 L x 24.9174 W x 32.131 H centimeters, 0.558 kilograms, FMT-JD-SJ2*ENUS, Fmt-jd-sj2*enus, Denier Polypropylene & Mesh Fabric Design

Questions about this item

Will the dual harness overheat or feel heavy during an all-day wedding shoot?

The harness weighs 1.19 lb and uses breathable mesh fabric to reduce heat build-up during extended wear.

What must my cameras already have to attach to the FMT-JD-F2?

Each camera needs a standard 1/4" tripod socket to accept the harness's locking screw mounts.

Can I keep using my lighter single-camera strap alongside this dual harness?

The JD-F2 supports two cameras up to 580 g each, while the older JD-F1 model is rated for only 300 g.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.