FOCUSTEC
FOCUSTEC Dual Monitor HDMI DisplayPort KVM Switch 4K@60Hz 2-Port USB 2.0
Share two computers across dual monitors at 4K 60 Hz with USB 2.0 peripherals, audio and mic via wired button or host switching
- TypeUSB
- Share two 4K monitors at 60Hz between two computers
- Switch instantly with wired button or front-panel host button
- Keep one keyboard, mouse and USB 2.0 peripherals for both systems
- Built-in audio and mic jacks for headset sharing
- 5V power adapter included for stable dual-display operation
Dual-monitor KVM for two computers
The FOCUSTEC switch lets two desktops or laptops share one keyboard, one mouse and two monitors. Each system must provide both an HDMI and a DisplayPort output and support extended desktop mode. It is built for users who need simultaneous visibility across two screens from either machine.
4K at 60 Hz over HDMI and DisplayPort
Video passes through at up to 4K resolution and 60 Hz refresh rate on both display outputs. The spec is the deciding factor for anyone driving high-resolution panels; lower refresh rates or single-monitor setups do not need this bandwidth.
USB 2.0 hub with audio and mic
A front USB 2.0 port shares printers, scanners or flash drives between the two hosts. Analogue audio and microphone jacks switch with the computers. The unit requires the included 5 V power adapter and changes sources via a wired push-button or a host button; hotkey switching is not available.
Highlights
- Share two 4K monitors at 60Hz between two computers
- Switch instantly with wired button or front-panel host button
- Keep one keyboard, mouse and USB 2.0 peripherals for both systems
- Built-in audio and mic jacks for headset sharing
- 5V power adapter included for stable dual-display operation
Specifications
| Type | USB |
|---|
Questions about this item
What does 4K at 60 Hz actually deliver on my monitors?
Both connected displays can run at 4K resolution with a 60 Hz refresh rate when each computer supports dual-screen output and extended display mode.
Which video interfaces does the switch use and what do they limit?
Each computer connects through one HDMI and one DisplayPort input; the switch outputs one HDMI and one DisplayPort signal to the monitors, so you need one monitor of each type for the recommended setup.
What physical connections and power does the unit need to fit on my desk?
It requires a 5 V power adapter (included) plugged into the wired remote’s extension cord, two HDMI cables, two DisplayPort cables, and USB 2.0 cables from each computer to the switch.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



